Authorization; Anonymous Operator - RADWAG WPY User Manual

None
Stabile
MIN stable
MIN non-stable
OK stable
OK non-stable
MAX stable
MAX non-stable
Confirmation of
cycle completion *
*) Not applicable to „Standard" software.
• Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Notice:
By default all outputs have no function attributed – setting <None>.

19. AUTHORIZATION

The submenu <
in as the Administrator. In this group of parameters access levels can be
outlined.
To enter submenu <
„ Authorization".

19.1. Anonymous Operator

The program allows to attribute the authorization access level to an operator
who does not perform the log-in procedure (anonymous operator).
Output disabled
Stable weighing result over LO threshold value
Stable weighing result below the MIN threshold
Non-stable weighing result below the MIN threshold
Stable weighing result between MIN and MAX
thresholds
Non-stable weighing result between MIN and MAX
thresholds
Stable weighing result over the MAX threshold
Non-stable weighing result over the MAX threshold
Signal that confirms that a cycle of dosing has been
completed (the defined amount)
Authorization> is accessible only while being logged
Authorization>, press
68
:
and then