Starting The Working Mode; Local Settings Of The Workign Mode - RADWAG WPY User Manual

26.1. Starting the working mode

Procedure:
• While in the main window press
see a submenu <Working Modes> comprising a list of modes,
• Choose <
to the main window displaying icon
• The weight unit is automatically changed to „pcs" and two screen
buttons on the right side appear:

26.2. Local settings of the workign mode

Local settings of the working mode <
on pressing a hot key <
Save Mode
Down-weighing
Checkweighing
Tare mode
Labelling mode
Statistics
Automatic correction
of reference mass
Minimum reference mass
Counting Pieces>, program automatically returns
Enter piece mass
Estimate piece mass
Local parameters>:
in the top bar, then you will
in the top bar,
Counting Pieces> are accessible
Detailed description in ch. 24.2 of the user manual
Detailed description in ch. 24.3 of the user manual
Detailed description in ch. 24.4 of the user manual
Detailed description in ch. 24.5 of the user manual
Detailed description in ch. 24.6 of the user manual
Detailed description in ch. 24.7 of the user manual
Detailed description in ch. 25.2.1 of the user manual
Detailed description in ch. 25.2.2 of the user manual
93