Setting Date And Time; Sound Signal; Touch Panel Calibration - RADWAG WPY User Manual

21.2. Setting date and time

Users can set date and time that are visible in the main window of the
display. Entering the edition of date and time can be made in two ways:
• Pressing the field „date and time" in the top bar of the main screen,
• Pressing button
After entering the setting of date and time the screen keyboard appears.
Set year, month, day, hour, minutes and confirm by pressing
Notice:
Parameter <
on the authorization access level set in the related parameter.

21.3. Sound signal

Procedure:
• Enter <
and set accordingly.
Settings:
None
Buttons
Sensors
All

21.4. Touch panel calibration

Touch panel calibration is required when inappropriate operation is
recognized. E.g. the reaction in a different place than the touching point.
Procedure:
• Enter submenu <
• Select <
appears,
and then
Date and Time> is accessible in the scale menu depending
Others> according to ch. 21 of this manual, <
- Sound for buttons and proximity sensors disabled
- Sound for buttons enabled
- Sound for proximity sensors enabled
- Sound for buttons and proximity sensors enabled
Others> according to ch. 21 of this manual,
Touch Screen Calibration> and then an editing field
:
„ Others /
74
Date and Time".
.
Beep>