RADWAG WPY User Manual page 118

• Press an on-screen button
• Enter to scale's memory gerenal parameters on the working mode
(in accordance with point 29.2of this user manual),
• After returning to the main window of the <
the on-screen function key
• If the ingredient control mode is enabled, then the scale software opens
an editing window <Ingredient control> with a numeric keyboard and an
editing field for entering a correct code of the weighed ingredient using a
barcode scanner. Weighing of each following ingredient requires giving
its corresponding code.
In case when:
1. The inserted code of the current ingredient is incorrect, and the
ingredient is in recipe composition, the software displays the following
message: <Incorrect Ingredient Code. Ingredient already in recipe
content. Go to this ingredient?>. Accept this message by pressing
key. The software goes to the weighing process of the ingredient.
If key is pressed, the software returns to displaying the editing
window <Ingredient control > featuring the numeric keyboard for
entering the correct code of an ingredient.
2. The inserted code of the current ingredient is incorrect, and the
ingredient is not in the recipe composition. The software displays a
message: <No ingredient with specified code. Abort?>. On accepting
the message by pressing
ingredient on the list. If
to displaying the editing window <Ingredient control> featuring the
numeric keyboard for entering the correct code of an ingredient.
3. If the inserted code of the current ingredient is correct, then the software
displays a message: <Correct Ingredient code> and goes to
ingredient's weighing process.
• The workspace on the display indicates a bargraph denoting mass of
a weighed ingredient of a recipe and the following information:
to select a required recipe.
(process start),
key the software goes to another
key is pressed then the software returns
118
Recipes> mode press