RADWAG WPY User Manual page 119

Process in progress: Test recipe
Ingredient: 1 / 3 [ Ingredient 1 ]
Portion:
Charge:
Completed: 0%
Where:
Process in progress:
Test recipe
Ingredient:
[ Ingredient 1 ]
Portion: 0 g
Portion: -500.0 g
Charge:
Completed: 0%
Notice:
• If on process start the weighing platform is loaded, the software will
indicate message <Load appropriate product> while trying to accept a
measurement.
• If a user tries to accept the following weighed mass wihtout chaging
mass of the load placed on the weighing platform, the software displayes
a message <Load appropriate product>,
• If a user tries to accept mass of a portion while the parameter <
Portion weighing> is disabled then the software displays the following
message <Load appropriate product>,
• If a user tries to accept an exceeded value of permissible ingredient
mass, then the software displays the following message <Permissible
value of ingredient mass exceeded. Recalculate ingredients?>. On
rejecting the message by pressing
previous step. On accepting the message by pressing
software automatically recalculates mass of the ingredients proportionally
to the exceeded value of mass and returns to recipe making process.
• If a user tries to accept an unstable mass indication, the software
displays a message <Measurements unstable>.
0 g / -500.0 g
1 / 10
Process status
Name of prepared recipe
Number of weighed ingredient / Total number of
1 / 3
ingredients in a recipe
Name of the weighed ingredient
Current mass of the weighed ingredient
Current deviation fro mthe reference mass
Number of weighed charge / Total number of charges
1 / 10
Process progress
key the software returns to the
119
key the