User Adjustment; Adjusting Procedure - RADWAG WPY User Manual

22. USER ADJUSTMENT

Scales require to recalculate internal divisions to more suitable ones (e.g.
g, kg etc.). In order to do this they require an adjustment factor. It is adjusted
during the adjustment procedure using a mass standard. Adjustment should
be carried out if weighing a standard mass shows a different mass value.
To enter < User Adjustment>, press
„ User Adjustment".

22.1. Adjusting procedure

• Enter submenu <
and select: "
• After entering the parameter the following message box appears:
• Take the load off the pan of platform 1,
• Press button
adjusting start mass: „Evaluation of starting mass",
• After the procedure has been completed the following message
box appears:
User Adjustment > according to ch. 22
Adjustment",
. The following message appears during
An option only for non-verified scale
key and then
76
: