Report From Adjustment Process - RADWAG WPY User Manual

• Take the load off the pan of platform 1,
• Press button
start mass: „Evaluation of starting mass",
• After the procedure has been completed the following message
box appears:
• Accept the message box by pressing
mode.

22.3. Report from adjustment process

Parameter <
automatic printout of a report from adjustment process on a printer plugged
to the scale.
Procedure:
• Enter submenu <
of this user manual, select parameter <
set its appropriate value.
Where:
-
No
-
Yes
Notice:
Submenu: "
/ Adjustment report Printout template" enables optional modification
of report template (see ch. 16.2.3 of this user manual).
. The following message appears during adjusting
Report printout> enables activating the function of
User Adjustment> in accordance with ch. 22
Automatic report printout switched off
Automatic report printout switched on
Devices / Printer / Printouts
78
key and return to weighing
Report printout> and