Motion Detection Alarm - HIKVISION DS-8004HCI-S User Manual

5. Setup alarm policy: You can select one or more response: "On Screen Warning",
"Audible tone", "Upload to Center" and "Trigger Alarm Output". Use the [] [] and
[EDIT] key to enable or disable items. "×" is disable and "" is enable.
6. Save alarm setup: After making selections, press "Confirm" to return to the "Camera Input
adjustment" menu. In this menu, press "Confirm" to save current camera parameters and return
main menu.
7. Save all cameras: If you want to setup other cameras, please repeat steps two through six. In
"Image Setup" menu, press "Confirm" to save all cameras parameters, or [ESC] to abort.

6.9 Motion Detection Alarm

This feature generates an alarm when video motion is detected in a camera views.
Setting Up Motion Detection:
1. Enter the "Camera Input Adjustment" menu:
2. Select camera: Use [] [] to select one camera.
3. Select motion detection sensitivity: There is a selection button to the right of "Motion
Det. Level" that selects the motion detection sensitivity. There are 7 options from 0 (the
lowest) to 5 (the highest) and "Off". Use the [] [] keys to make a selection. In the
"Off" option the DVR will not response to motion detection. If you select other options
the "Motion Area Setup" and "Policy Setup" buttons will be active. If you select low
sensitivity, such as 0, a great deal of image movement is required to generate a motion
92