Alarm I/O Setup - HIKVISION DS-8004HCI-S User Manual

6.12 Alarm I/O Setup

Configuring Input Alarms:
1. In main menu select "Alarms" to enter the alarm setup menu.
2. Select an alarm input using the [↑] [↓] keys.
3. Alarm type: This is sensor type used. You can select "Normal Open" or "Normal
Closed" to accommodate the sensor type used.
4. Enter the "Alarm Handling" sub menu: In the "Alarms" menu, there are two options
for "Alarm Handling." One is "Ignore", and the other is "Handle". If you select the
"Handle" option the "Policy" and "PTZ Linkage" buttons will activate. Select the
"Policy" button and press [ENTER] to access the "Alarm in Handling" sub menu:
102