HIKVISION DS-8004HCI-S User Manual page 103

5. Alarm trigger record channel setup: You can select channels to record for each alarm input.
In the sub menu, you can use [ENTER] or [EDIT] to enable the record channel. "×" means
disable and " means enable.
Note: In order to trigger the channel to record, the channel must be enabled in the "Recording"
menu. Refer to chapter 6.11 for details.
6. Schedule for alarm handle method: When a schedule is enabled, external alarms will
trigger a DVR response only during the scheduled on times.
7. Alarm handle method (alarm response): Alarm responses include: "On Screen Warning",
"Audible Warning", "Upload to Center", "Trigger Alarm Output" and "Send Email".
Note: If "On Screen Warning" is enabled, an external alarm while viewing in the live mode will
cause the alarmed camera to display on the monitor. Multiple alarms will sequence on the screen.
When the external alarm clears the display will return to the previous viewing screen.
8. Save setup: In "Alarm in Handling" sub menu, press the "Confirm" button to return to the
"Alarms" menu. In "Alarms" menu, press "Confirm" button to save the parameters.
PTZ Linkage:
103