2. Set the IP Address as "0.0.0.0."
3. Select "Confirm" to save.
4. Reboot the DVR. During reboot, the DVR will look for a DHCP server and obtain a
dynamic IP address. The IP number assigned will display in the menu.
6.13.3 PPPoE Function
Enter the DVR "Network" menu:
Enable "PPPoE" option:
1. Input PPPoE username which is from ISP
2. Input PPPoE password which is from ISP
3. Input PPPoE password again to verify.
4. Save parameters. In "PPPoE" menu, press "Confirm" to save the parameters and return to
the Network menu. Press "Confirm" again in "Network" menu. The DVR must reboot
before the parameters take effect. In reboot process, DVR will start dialup using PPPoE
parameters. If DVR dialup to the internet is successful, the DVR will display the dynamic
internet IP address in the Network menu.
109