Video Parameter Setup - HIKVISION DS-8004HCI-S User Manual

name position. You can copy the position to any other camera. The setup steps are:
2. Enable the check box on the right side of camera name, then move the "Active Window"
to the "Position" button and press [ENTER] to enter the camera name position setup
interface.
3. Use the [] [] [] [] keys to move camera name position. Press [ENTER] to return
the "Image Setup" menu. Press "Confirm" to save the settings, or "Cancel" or [ESC] to
abort.

6.5.2 Video Parameter Setup

This feature allows you to make changes to the visual display of individual cameras. You can
adjust the brightness, saturation, contrast and hue. You can setup the camera individually and you
can copy the video parameters of one camera to any other cameras. Here are the setup steps:
1. Enter the "Camera Input Adjustment" menu and select camera (use the [] [] keys to
select a camera).
2. Select the "Adjust" button for each parameter; Brightness, Contrast, Saturation and Hue.
Press the [ENTER] key to access the parameter overlaid on an image of the selected
camera. Use the [] [] keys to adjust as you watch the image change. When you are
satisfied with the results, press [ENTER] to return "Image Setup" menu.
85