Ptz Control - HIKVISION DS-8004HCI-S User Manual

4.4 PTZ Control

Note: Ensure that PTZ communication parameters have been configured properly before
attempting normal operation. Your password must have PTZ control enabled in order to control
cameras. Please refer to "PTZ Setup" in section 6.14.
Entering the PTZ control interface:
In live mode, press the [PTZ] key. In the login dialog, select a user name and input the correct
password. In menu mode, press the [PTZ] key and you will enter the PTZ control interface
directly.
There is a "PTZ Control" prompt in the PTZ control interface. The displayed camera name
indicates the camera under control. For example, "Camera 01" means you are controlling PTZ
camera #1.
Select the desired channel:
In the PTZ control mode, you can press the numeric keys to select the desired channel (Ex:
"0,""1," for camera #1 – or "1" if using a 4/8 channel unit).
After you select the camera PTZ, you can use the shortcut keys to control the PTZ.
51