HIKVISION DS-8004HCI-S User Manual page 135

•
Type "rebootDev" then press [Enter] on PC keyboard to reboot DVR.
•
Press "ctrl" + "u" keys of the PC keyboard immediately when rebooting, do not
release them.
•
The following sentence is appeared: Please input [u/U] or [ESC] key Release "ctrl"
and "u" keys.
•
Press "u" key. In the message line of "IP address of NET DVR", input any IP, just
make sure DVR IP and FTP server IP are in the same sub net.
•
In the message line of "IP address of the FTP server", input the FTP server IP.
•
In the message line of "Confirm? (y/n)", press "y". DVR will connect with that FTP
server, and download the firmware file (digicap) through network. Please make sure
FTP server and firmware file are setup and run correctly. After upgrade finished,
press any key to reboot DVR.
135