HIKVISION DS-8000 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. DS-8000 Series
  6. User manual

HIKVISION DS-8000 Series User Manual

Ds-8000 series embedded net dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-8000 Series Embedded Net DVR
Thank you for purchasing our embedded Net DVR. This manual is applicable for DS-8000HCI,
DS-8000HSI, DS-8000HTI and DS-8000HFI series embedded Net DVR. Please read this User
Manual carefully to ensure that you can use the device correctly and safely.
The contents of this Manual are subject to change without notice.
User Manual of Embedded Net DVR

User Manual

(V1.5)
Page
Total
1
113

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-8000 Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-8000 Series

Summary of Contents for HIKVISION DS-8000 Series

  • Page 1: User Manual

    User Manual of Embedded Net DVR DS-8000 Series Embedded Net DVR User Manual (V1.5) Thank you for purchasing our embedded Net DVR. This manual is applicable for DS-8000HCI, DS-8000HSI, DS-8000HTI and DS-8000HFI series embedded Net DVR. Please read this User Manual carefully to ensure that you can use the device correctly and safely.

  • Page 2: Table Of Contents

    User Manual of Embedded Net DVR Index Version Description...........................4 Chapter1 Product Introduction....................8 Summary ........................8 Model Description.....................8 Features ........................8 Chapter2 Installation.......................11 Checking the DVR and Its Accessories..............11 HDD Installation .....................11 Rear Panel Description....................12 2.3.1 DS-8000HCI/HTI/HFI Rear Panel..............12 2.3.2 DS-8000HSI Rear Panel .................13 External Alarm In/Out Connection .................14 Chapter3 Operational Instructions ..................15...
  • Page 3 User Manual of Embedded Net DVR View Tampering Alarm ...................57 Video Loss Alarm....................59 5.10 Motion Detection Alarm ..................61 5.11 Preview Properties ....................64 5.12 Recording Setup ......................66 5.13 External Alarm Input and Relay Output..............70 5.14 Network Parameters ....................74 5.15 PTZ .........................76 5.16 RS232 setup ......................80 5.17...

  • Page 4: Version Description

    User Manual of Embedded Net DVR Version Description Version1.5 built 060512: Version1.5 firmware of DS-8000 series DVR has the following new features: 1. Codec update. Specially improve 4CIF compression video quality. Please update “PlayM4.dll” file for client software. 2. In DVR “User Rights” menu, add the playback right option for each channel.
  • Page 5 For these two kinds of solutions, DVR and ATM machine use “HIKVISION” protocol for communication. If you enable “Network Receive” solution, DVR will listen port (default is 10000), capture and overlay the text string based on “Hikvision” protocol via network. Page Total...
  • Page 6 User Manual of Embedded Net DVR If you enable “ATM CMD from Serial Port” solution, please setup DVR “RS232” parameters as following: 9600bps, transparent channel. For this solution, ATM machine and DVR will communicate based on “Hikvision” protocol through RS232 port. Page Total...
  • Page 7 User Manual of Embedded Net DVR Version1.4: Version1.4 firmware of DS-8000 series DVR has the following new features: 1. Support dual streams. One is called “Main Stream”, and the other is called “Sub Stream”. The main stream is for recording, also can be network preview. Sub stream is used for network preview.

  • Page 8: Chapter1 Product Introduction

    TCP/IP. The firmware is burned in the flash, more stable and reliable. DS-8000 series device has both the features of digital video recorder (DVR) and digital video server (DVS). It can work stand alone, also be used to build a powerful surveillance network, widely used in bank, telecommunication, transportation, factories, warehouse, irrigation, etc.
  • Page 9 User Manual of Embedded Net DVR Support multi area motion detection. Support OSD and changeable OSD position. Support LOGO and changeable LOGO position. Local functions Record Support multiple record type, including real time, manual record, motion detection, external alarm, motion&alarm, motion|alarm. Support 8 IDE HDDs and each HDD can support 2000GB.
  • Page 10 User Manual of Embedded Net DVR Support PSTN for narrow band dialup. Support remote parameters setup. Alarm information can be sent to remote center. Network control PTZ. Network record the real time stream. Network download and playback the recorded files in DVR. Remote upgrade the firmware.

  • Page 11: Chapter2 Installation

    User Manual of Embedded Net DVR Chapter2 Installation Warning: Before you install the DVR, please make sure the power of DVR is switched off. Checking the DVR and Its Accessories When you get the product, check that all the items are included in your product package. There is a list in the package.

  • Page 12: Rear Panel Description

    Audio line input for voice. USB memory disk, USB HDD, USB CD-R/W USB Interface VGA Interface VGA display. One is for Hikvision keyboard, and one is for DVR Keyboard Interface cascade. Connect RS-232 devices. Refer to Appendix B for pin RS-232 definition.

  • Page 13: Ds-8000Hsi Rear Panel

    4 Aux video outputs, only for DS-8016HSI. Video Output Connect monitor, output video and menu. VGA Interface VGA display. One is for Hikvision keyboard, and one is for DVR Keyboard Interface cascade. Connect RS-232 devices. Refer to Appendix B for pin RS-232 definition.

  • Page 14: External Alarm In/Out Connection

    User Manual of Embedded Net DVR External Alarm In/Out Connection Alarm input port: G (GND): Conenct the GND of sensor. 1~8: Alarm input, support normal open/normal close. 0: Reserved. Alarm output: 1G~4G: 4 relay output. Alarm output connection Please note the usage of jumper JJ1. If you use DC, either of connections is OK. We suggest you to use those DC under 12V, 1A.

  • Page 15: Chapter3 Operational Instructions

    User Manual of Embedded Net DVR Chapter3 Operational Instructions Front Panel 3.1.1 DS-8000HCI Black Front Panel Index Type Name Description POWER POWER Device switch with power indicator lamp. Green means DVR is working; Red means DVR is powered off; No light means no power is supplied.
  • Page 16 User Manual of Embedded Net DVR EDIT 1. In edit state, delete the current cursor character; IRIS+ in PTZ control; or × to enable or disable. 3. Select Input switch (number, lower case, upper case and symbol); FOCUS+ in PTZ control; In preview mode, display or hide the channel status bar.

  • Page 17: Ds-8000Hsi Front Panel

    User Manual of Embedded Net DVR 3.1.2 DS-8000HSI Front Panel Index Type Name Description State 1-16 Show channel 1-16 status. Green means recording; Red means Lamps network transmission; Orange means recording and network transmission. Lamp twinkle and red means the corresponding HDD has error.
  • Page 18 User Manual of Embedded Net DVR FOCUS- in PTZ control. 1. Switch auxiliary video output; ZOOM- in PTZ control. Control Direction Composed of Keys Keys 1. Menu mode, use to select to edit; 2. PTZ direction control; 3. Playback speed control. Menu confirmation;...

  • Page 19: Ds-8000Hci-Cdrw/Ds-8000Hti/Hfi Front Panel

    User Manual of Embedded Net DVR 3.1.3 DS-8000HCI-CDRW/DS-8000HTI/HFI Front Panel Index Type Name Description IR receiver. State Show channel 1-8 status. Green means recording; Red means Lamps network transmission; Orange means recording and network transmission. Lamp twinkle and red means the corresponding HDD has error.
  • Page 20 User Manual of Embedded Net DVR EDIT 1. In edit state, delete current cursor character; IRIS+ in PTZ control; or × to enable or disable. Select 1. Enter into PTZ control mode; IRIS- in PTZ control. 1. Input switch (number, lower case, upper case and symbol); FOCUS+ in PTZ control;...

  • Page 21: Ir Controller

    User Manual of Embedded Net DVR IR Controller Index Name Description POWER Turnoff device. Enable/Disable IR remote control Numeric Keys Same as numeric keys of front panel. EDIT Same as EDIT key of front panel. Same as A key of front panel. Same as REC key of front panel.
  • Page 22 User Manual of Embedded Net DVR Same PTZ key of front panel. Same as ESC key of front panel. Reserved Same as F1 key of front panel. IRIS, FOCUS ZOOM for lens Lens control control. Same as F2 key of front panel. Loading the batteries into the IR controller Remove the battery cover.

  • Page 23: Menu Description

    User Manual of Embedded Net DVR Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Camera name and position setup Video standard Adjust Brightness, Contrast, Hue Brightness and Saturation Menu transparency OSD Display mode, position and Unit name OSD format setup Display Device ID...

  • Page 24: Menu Operation

    User Manual of Embedded Net DVR Restore parameters Upgrade firmware Text input mode HDD management Transaction ATM IP address Utilities Clear alarm output ATM type Reboot Text information Power off View log System information 3.3.2 Menu Operation How to enter into menu mode Press MENU key to enter into DVR main menu.
  • Page 25 User Manual of Embedded Net DVR Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by keys. There are such kinds of menu items: Check Box: Provide 2 options, “...

  • Page 26: Character Input

    User Manual of Embedded Net DVR Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status is appeared: Here it means you can press numeric keys to input digital number. Press A key to change input methods.

  • Page 27: Chapter4 Basic Operation Guide

    User Manual of Embedded Net DVR Chapter4 Basic Operation Guide Power on Note: Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface. Otherwise, you can not see graphic user interface and can not operate. If POWER lamp is off, please do as following: Step1: Connect AC cable correctly;...
  • Page 28 User Manual of Embedded Net DVR Camera record status is following: Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green Real time recording Blue Motion detect recording External alarm recording Camera alarm status is following: Page Total...
  • Page 29 User Manual of Embedded Net DVR Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&External alarm Green No alarm Blue Motion alarm External alarm Press numeric keys to switch over individual camera preview. If DVR has less than 10 channels, press one numeric key to switch corresponding channel.

  • Page 30: User Name And Password

    User Manual of Embedded Net DVR User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified. The administrator can create 15 users and define their user rights.
  • Page 31 User Manual of Embedded Net DVR Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using keys. Press ENTER key to enter into following password menu: Step 3: Input new password Press EDIT key to enter into edit box. You can use numeric keys to input new password. The password can be null.

  • Page 32: Ptz Control

    User Manual of Embedded Net DVR PTZ Control Note: The user must have the “PTZ control” right. PTZ control interface In preview mode, press PTZ key, in the login dialog, select one user name and input the correct password, you can enter into PTZ control interface. In menu mode, press PTZ key, you can enter into PTZ control interface directly.
  • Page 33 User Manual of Embedded Net DVR Light control key: LIGHT/F1 ; Auxiliary device control key: AUX/F2 Adjust preset description In PTZ control mode, press REC/SHOT key, and press the preset number (three numeric keys), DVR will adjust the corresponding preset number. Repeat pressing REC/SHOT key, and press the preset number, DVR will adjust that preset number.

  • Page 34: Manual Record

    User Manual of Embedded Net DVR Manual Record Note: The user must have the corresponding right, DVR has HDD and HDD is formatted already. Manual record In preview mode, press REC key, in the pop-up login dialog, select the name and input the correct password, you can enter into the “Manual Record”...

  • Page 35: Playback

    User Manual of Embedded Net DVR Playback Note: The user must have “Playback” right. Playback interface In preview mode, press PLAY key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback” interface. In menu mode, press PLAY key, you can enter into “Playback” interface directly. One Channel Playback Two Channels Playback Description...
  • Page 36 User Manual of Embedded Net DVR Second: If DVR support 2-ch playback, you can use ↑ or ↓ key to select the second channel except the main channel. These two channels can be playback synchronously. If you select the second channel as none, only the main channel is playback. Rec Type: Use ↑...
  • Page 37 User Manual of Embedded Net DVR If the matched files are more than 8, you can use “Page No.” to select page (use numeric keys or ↑ ↓ keys to select page). In the file list box, use ↑ ↓ keys to move the scroll bar to the file, press ENTER key to playback the file.
  • Page 38 User Manual of Embedded Net DVR One Channel Playback Two Channels Playback At the bottom of image, there is an information bar and the following information is included: Volume, Play Progress, Play Speed, Played Time and File Total Time. Display/Hide information bar: MENU Open/Close sound: PLAY...
  • Page 39 User Manual of Embedded Net DVR Note: When DVR is busy, if you select high play speed, maybe there is difference for actual play speed. Exit playback In playback interface, press ESC key to enter into preview mode. In playback interface, press MENU key to enter into main menu, press REC key to enter into manual record, and press PTZ key to enter into PTZ control mode.

  • Page 40: Backup Recorded Files

    User Manual of Embedded Net DVR Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback interface, you can backup the recorded files. In the preview mode, press PLAY key, in the login dialog, select username and input the correct password, you can enter into the playback interface.
  • Page 41 User Manual of Embedded Net DVR Step 2: Select the files that you want to backup In the file list box, use ↑ or ↓ keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press EDIT key to select it. The symbol “ ” is the selection tag. You can use the same method to select other files you want to backup.

  • Page 42: Voice Talk

    User Manual of Embedded Net DVR player software in attached CD. Exit playback interface Please refer to chapter 4.6. Voice Talk VOIP is not available. You can use client software to start talking with DVR. Auxiliary Video Output Note: Only DS-8016HSI has this function. Press MON key, you can switch any channel live video input to one of the four auxiliary video output.
  • Page 43 User Manual of Embedded Net DVR Shut down DVR normally Use menu Enter into “Utilities” menu, move “Active Frame” to “Power Off” button and enter into power off dialog, press “Confirm” to shut down the DVR. Use POWER key of front panel or IR controller Press POWER key for above 3 seconds.

  • Page 44: Chapter5 Parameters Setup Guide

    User Manual of Embedded Net DVR Chapter5 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters take into effective.
  • Page 45 User Manual of Embedded Net DVR In the user name list box, only “admin” is existed. You can use → key, move “Active Frame” to password edit box, and press EDIT key to enter into edit status. Press numeric keys to input the new password.

  • Page 46: Add And Delete User

    User Manual of Embedded Net DVR Add and Delete User Enter into “User Management” interface. Add user The steps are following: Step 1: Enter into “User Management” menu Please refer to chapter 5.1 Step 2: Add new user name In the “User Management” menu, move “Active Frame” to “Add” button and press ENTER , in the pop-up dialog, input the new user name (refer to chapter 3.4), press ENTER and return “User Management”...
  • Page 47 User Manual of Embedded Net DVR numeric keys to input the new password. Step 3: Setup the rights for new user The new added user has not any operational rights. You must setup rights for him. In the users list box of “User Management” menu, use keys to select the new user name, then use key to “Default Rights”...
  • Page 48 User Manual of Embedded Net DVR Parameters Setup: Locally setup the DVR parameters; Log: Locally view the log on DVR; Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR, etc. “Remote Rights”: PTZ Control: Remote control PTZ; Record: Remote manual start/stop recording;...

  • Page 49: Unit Name And Device Id

    User Manual of Embedded Net DVR Unit Name and Device ID Unit name In the “Display” menu: There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press EDIT key to enter into edit status, you can modify the unit name.

  • Page 50: Video Output Standard And Vga Setup

    User Manual of Embedded Net DVR Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output. You can modify video output standard to match video input.

  • Page 51: Osd Setup

    User Manual of Embedded Net DVR OSD Setup OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
  • Page 52 User Manual of Embedded Net DVR Display mode: There are several display modes: Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active Frame” to “OSD” item, you can select one mode. Display position and format: Move “Active Frame” to “Position” button on the right side of “OSD”, press ENTER to enter into setup image, you can find there are 22*18 (for NTSC, 22*15) small panes, and OSD position is in red.
  • Page 53 User Manual of Embedded Net DVR Step 2: Move “Active Frame” to camera name edit box, press EDIT key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4). The camera name can support 32 characters. Step 3: Press ENTER key to exit edit status.

  • Page 54: Video Parameters Setup

    User Manual of Embedded Net DVR Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters such as brightenss, saturation, contrast and hue, etc. You can setup the camera individually, and also you can copy the video parameters of one camera to any other cameras.

  • Page 55: Mask Area Setup

    User Manual of Embedded Net DVR Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup” menu: Step 2: Select one camera: You can use keys to select one camera.
  • Page 56 User Manual of Embedded Net DVR EDIT key, the yellow pane will be turned into red, then you can use ↑ ↓ → ← keys to extend the red pane. This red area is the mask area. After you make sure the red mask area, press EDIT key to save the mask area. Press ESC key to cancel the mask area.

  • Page 57: View Tampering Alarm

    User Manual of Embedded Net DVR View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1: Enter into “Image Setup” memu: Step 2: Select camera: Please use keys to select one camera. Step 3: Select sensitivity: You can use ↑...
  • Page 58 User Manual of Embedded Net DVR Step 6: Alarm schedule setup: When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy the schedule of one day to other days.

  • Page 59: Video Loss Alarm

    User Manual of Embedded Net DVR Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use keys to select one camera.
  • Page 60 User Manual of Embedded Net DVR effective. Step 5: Setup alarm policy: You can select one or more response solutions, including “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. You can ↑ ↓ and EDIT key to enable or disable them. “×” is disable and “ ” is enable. Step 6: Save alarm setup: After your setup, press “Confirm”...

  • Page 61: Motion Detection Alarm

    User Manual of Embedded Net DVR 5.10 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use key to select one camera. Step 3: Select motion detection sensitivity: On the right side of “Motion Det.
  • Page 62 User Manual of Embedded Net DVR The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7).
  • Page 63 User Manual of Embedded Net DVR Step 5: Motion alarm policy: Move “Active Frame” to the corresponding “Policy” button of motion detection alarm, press ENTER key to enter into “Motiomn Alarm Handle” menu: Step 6: Motion alarm record channel setup: When there is motion alarm happened, you can trigger related camera to start recording.

  • Page 64: Preview Properties

    User Manual of Embedded Net DVR as “On Screen Warning”, “Audible Warning”, “Upload to Center” and “Trigger Alarm Output”. Description: If “On Screen Warning” is enabled, when there is motion alarm happened and DVR is in preview mode, DVR will pop-up the related camera. If you trigger more than one camera, DVR will pop-up them one by one every 10 seconds.
  • Page 65 User Manual of Embedded Net DVR and “4 Screen” options. If DVR has more than 4 but less than 9 channels, there are “1 Screen”, “4 Screen” and “9 Screen” options. If DVR has 16 channels, there are “1 Screen”, “4 Screen”, “9 Screen”, “12 Screen”...

  • Page 66: Recording Setup

    User Manual of Embedded Net DVR 5.12 Recording Setup In main menu, there is an icon named “Recording”. You can enter into recording menu as following: “Recording” menu description: If HD Full: There are two options: “Overwrite” and “Stop recording”. If you select “Overwrite”...
  • Page 67 User Manual of Embedded Net DVR Bit Rate Type: There are two options: “Variable” and “Fixed”. If you select variable bit rate, DVR will adjust the actual bit rate according to the video movement. When there is not much movement, DVR will use low bit rate, while there is much movement, DVR will use high bit rate.
  • Page 68 User Manual of Embedded Net DVR means enable. Schedule: When you enable recording function, you can setup recording schedule. Note: When the camera’s recording schedule is modified, you must reboot DVR to make it into effective. All day recording setup: Step 1: Enter into recording schedule menu In recording menu, use ENTER or EDIT key to enable record function (“...
  • Page 69 User Manual of Embedded Net DVR None all day recording setup Step 1: Enter into recording schedule menu In recording menu, use ENTER or EDIT key to enable record function (“ ” flag), press “Schedule” button to enter into recording schedule menu. Step 2: Select ond day and disable all day recording option For “Day”...

  • Page 70: External Alarm Input And Relay Output

    User Manual of Embedded Net DVR If record type is “Alarm” or other related types, you must setup “Alarms” in order to trigger alarm recording (refer to chapter 5.13). The time period is among 00:00—24:00. 5.13 External Alarm Input and Relay Output For 8-channel DVR, there are 8 external alarm input and 4 relay output.
  • Page 71 User Manual of Embedded Net DVR Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input. In the sub menu, you can use ENTER or EDIT key to enable record channel. “×” means disable and “ means enable. Note: In order to trigger the channel to record, in “Recording”...
  • Page 72 User Manual of Embedded Net DVR First select one camera, then select one of following PTZ linkage: Preset: Set the flag as “ ” to enable preset, in the preset number edit box and input one preset number that has been setup already. Please refer to chapter 5.15 for preset setup. Sequence: Set the flag as “...
  • Page 73 User Manual of Embedded Net DVR “Schedule” button on right side of “Alarm Out Time” item, press ENTER key to enter into the corresponding schedule menu: Step 4: Setup alarm out schedule Like other schedule setup, you can set 4 time periods for one day and 7 days for one week. When you finish setup, press “Confirm”...

  • Page 74: Network Parameters

    User Manual of Embedded Net DVR 5.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note: If any network parameter is modified, you must save and reboot DVR to make it into effective. In main menu, move “Active Frame”...
  • Page 75 User Manual of Embedded Net DVR dynamic IP. This DNS is special software, not the normal domain name server. You can use the provided SDK to develop this DNS software. Multicast IP: It is one D-class IP address, among 224.0.0.0 --- 239.255.255.255. If you do not use multicast function, you do not need to set.

  • Page 76: Ptz

    User Manual of Embedded Net DVR 5.15 PTZ There is one RS-485 port at DVR rear panel used for PTZ control. You can setup RS-485 parameters to match your PTZ protocol. In main menu, move “Active Frame” to PTZ icon and press ENTER key, you can enter into PTZ menu as following: PTZ menu description Select channel: Select one PTZ camera.
  • Page 77 User Manual of Embedded Net DVR Sequence setup: Each sequence is made up of several curise points. Each cruise point includes one preset number, dwell time and dwell speed. Please make sure the PTZ you are using can support sequence function before you start to setup. You can save 16 sequnece. Cruise setup: Cruise is remembering the track of PTZ movement.
  • Page 78 User Manual of Embedded Net DVR into “Sequence” setup menu: In “Sequence” setup menu, first input the sequence number. The sequence is among 1 --- 16. Each sequence is made up of cruise points, and each cruise point includes preset number, dwell time and dwell speed.
  • Page 79 User Manual of Embedded Net DVR Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press ENTER to save the operation track and return “Cruise” setup menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button. Press “Return”...

  • Page 80: Rs232 Setup

    User Manual of Embedded Net DVR 5.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss ENTER key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
  • Page 81 User Manual of Embedded Net DVR Username, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC.
  • Page 82 User Manual of Embedded Net DVR Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port. You can use HyperTerminal or NetTerm to setup modem: AT&F ---- Retore default parameters (Generally, Modem is hard flow control) AT&S0=1 ---- Set Modem as answer ATE0 ---- Not display the input characters...
  • Page 83 User Manual of Embedded Net DVR Page Total...
  • Page 84 User Manual of Embedded Net DVR Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup.

  • Page 85: Exceptions

    User Manual of Embedded Net DVR 5.17 Exceptions The exceptions can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL differ. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 86: Transaction Information

    User Manual of Embedded Net DVR 5.18 Transaction Information The DVR can actively obtain or passively receive the credit card number from ATM machine linked through network or serial port, and credit card number can be overlay on live video, recorded and playback.
  • Page 87 You only need to setup DVR listen port. The default port value is 10000. In this case, you must develop the software that is run in the ATM machine based on Hikvision protocol. The software will send the transaction information directly to the DVR. DVR will receive, analyse and overlay the text on live video.
  • Page 88 User Manual of Embedded Net DVR In the case, you must set the RS-232 of DVR as transparent channel mode as following: A software must be run in the ATM machine, and send the credit card number, transaction code to DVR through RS-232 port. Please provide detail ATM machine communication protocol for actual projects.
  • Page 89 In the case, you must set the RS-232 of DVR as transparent channel mode as following: Also, a software must be run in ATM machine, and send command to DVR through RS-232 port based on Hikvision communication protocol. Page Total...

  • Page 90: Chapter6 Utilities

    User Manual of Embedded Net DVR Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: Save Parameters Save factory default parameters into FLASH memory. You can reboot DVR to make them into effective.

  • Page 91: Upgrade

    User Manual of Embedded Net DVR Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or “USB” upgrade mode. If you select “FTP” mode, you will enter into “FTP Upgrade” menu: Input the ftp server IP and press ENTER key.

  • Page 92: Hard Disk Management

    User Manual of Embedded Net DVR Hard Disk Management Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally. Clear Alarm Out Clear the alarm output manually.
  • Page 93 User Manual of Embedded Net DVR If you want to view the log based on default option, just press ENTER key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date). By Type To view log information of the assigned type.
  • Page 94 User Manual of Embedded Net DVR the information includes: Index, Occur Time, Major Type, Minor Type, Panel User, Net User, Host Address, Para. Type, Channel No, HDD No, Alarm In and Alarm Out. You can press “More Info” button for more information, also slect page number to view more information. Step 5: Press “Return”...

  • Page 95: System Information

    User Manual of Embedded Net DVR System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Page Total...

  • Page 96: Chapter7 Firmware Upgrade

    User Manual of Embedded Net DVR Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. There are two cases that you need to upgrade DVR firmware. One is update old firmware. The other is when the code in DVR FLASH is crashed.
  • Page 97 User Manual of Embedded Net DVR Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog, input password “target” in “New Password” and “Verify Password”...
  • Page 98 User Manual of Embedded Net DVR 7. Next time, you need not setup again, just double click and open “wftpd32.exe” to upgrade the DVR/DVS firmware. Page Total...

  • Page 99: Upgrade Mode

    User Manual of Embedded Net DVR Upgrade Mode Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software user manual for detail information. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need one host PC to run FTP server software and place firmware file (digicap), and make sure DVR and PC are in the same sub net.

  • Page 100: Appendix Ahdd Capacity Calculation

    User Manual of Embedded Net DVR Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for every hour, unit Mbyte.

  • Page 101: Appendix Bdvr Connect Cable Definition

    User Manual of Embedded Net DVR Appendix B DVR Connect Cable Definition 1 RS-485 connect cable made method Material and tool One twist cable (8 pins), one standard RJ45 connector and one tool special for RJ45. RJ45 introduction Pin definition To make the connect cable according the follows.

  • Page 102: Connect Cable Made Method

    User Manual of Embedded Net DVR hub or switch. The corresponding relationship of the direct cable (2) Use the following method to make the cross network cable when DVR is directly connected with client-end PC. The corresponding relationship of cross cable 3 RS-232 connect cable made method Material and tool One twisted cable (8 pins), one standard RJ45 head, one or more DB25 or DB9 plug-in, a tool...
  • Page 103 User Manual of Embedded Net DVR Pin definition To make the RJ45 according to the following pin definition; I means DVR input, O means DVR output. Pin index Name Description Carrier Detect Receive Data Transfer Data Clear Data Request to Send Terminal Device Ready Ground Null...
  • Page 104 User Manual of Embedded Net DVR Connection for RJ45 and DB9 25-pin to 9-pin converter internal connection is defined as following: Connection for DB25 and DB9 (3) When the serial port of DVR is connected with DCE device (like MODEM), one end of the cable is 8-pin RJ45 plug-in, the other end is DB25 pin plug-in, the corresponding relationship is as following: Connection for RJ45 and DB25 (DCE)

  • Page 105: Appendix C Specifications

    User Manual of Embedded Net DVR Appendix C Specifications DS-8000HCI DS-8000HTI DS-8000HFI DS-8000HSI Video H.264 compression Preview PAL: 704*576, NTSC: 704*480 resolution Playback QCIF/CIF/2CIF/ QCIF/CIF/2CIF/ QCIF/CIF/2CIF/ QCIF/CIF resolution DCIF/4CIF DCIF DCIF/4CIF Video input 4/8/12/16 4/8/12/16 4/9/16 Video input BNC (Electrical Level: 1.0Vp-p, resistance: 75Ω) interface Video output 1 channel, BNC (Electrical Level: 1.0Vp-p, resistance: 75Ω)
  • Page 106 User Manual of Embedded Net DVR Power 20 42W (without HDD) consumption Working -10 -- 55 temperature Working 10 --90 humidity Size 19” Standard (450mm*450mm*95mm) ≤8Kg (without HDD) Weight For DS-8000HCI, only 1 and 13 channels can support 2CIF/DCIF/4CIF, other channels can only support QCIF/CIF.

  • Page 107: Appendix D Quick Search Function Table

    User Manual of Embedded Net DVR Appendix D Quick Search Function Table Type Name Description Index User Create and delete users. System has one default management administrator. The administrator can create 15 users Safety and define their rights. function Password Modify password.
  • Page 108 User Manual of Embedded Net DVR Remote Remote record real time stream. record Remote Remote playback the recorded files in DVR playback Download Download recorded files in DVR. Remote Remote upgrade firmware. upgrade Transparent Remote control serial device connected with serial 5.16 channel port of DVR.

  • Page 109: Appendix E Troubleshooting

    User Manual of Embedded Net DVR Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, Power cable is broken. “POWER” light in front Panel does not turn on, and fan Power supply is broken. does not work.
  • Page 110 User Manual of Embedded Net DVR password, ect). Old player SDK (playm4.dll) Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification. If the circuit board is wet, dust on circuit board can cause a short circuit. The circuit board, plug and socket, housing fan and housing should be cleaned by brushing regularly.

  • Page 111: Appendix F Product Service

    User Manual of Embedded Net DVR Appendix F Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for the damage caused by non personal acts).

  • Page 112: Appendix G Customer Information Card

    User Manual of Embedded Net DVR Appendix G Customer Information Card User’s Name Mr./Mrs. Company Name Post Address Postcode Phone Number E-mail Model Number Product Serial Number Product Purchase Date Distributor Page Total...
  • Page 113 User Manual of Embedded Net DVR Suggestions: Page Total...

This manual is also suitable for:

Ds-8000hciDs-8000hsiDs-8000htiDs-8000hfi

Table of Contents