Network Setup - HIKVISION DS-8004HCI-S User Manual

the alarm clears. The post alarm option times are: 5 Seconds, 10 Seconds, 30 Seconds, 1
Minute, 2 Minutes, 5 Minutes, 10 Minutes and Manual Stop. If you select the "Manual'
option, the alarm output will not stop until you select the "Clear Alarm" button in
"Utilities" menu. So the actual alarm output time is made up of alarm input time and this
delay time.
3. Enter the alarm out schedule: You can schedule the times of day that the alarm outputs
are active. Move "Active Frame" to "Schedule" button on right side of "Alarm Out Time"
item, press [ENTER] to access the corresponding schedule menu:
4. Setup alarm out schedule: Like other schedule setup, you can set 4 time periods for one
day and 7 days for one week. When you finish setup, press the "Confirm" button to return
"Alarms" menu.
5. Copy one alarm output parameters to other alarm output: In the "Alarms" menu, you
can copy parameters of current alarm output to other alarm output.
6. Save setup: When you finish setup, in "Alarms" menu, press the "Confirm" button to
save.
Note: If any schedule is modified, you must reboot the DVR before it takes effect.

6.13 Network Setup

This section describes network parameters for communication with remote software.
Note: If any network parameter is modified, you must save and reboot the DVR before changes
105