UTP Network Connection
Materials and Tools Required:
•
CAT5 cable: The length depends on the installation, no to exceed Network guidelines
(100m).
•
Two standard RJ45 connectors.
•
Crimping tool for RJ45 connectors.
Suggestion: have a network cable test tool to test each cable made.
Pin Definition:
There are two cable configurations typically used for CAT5 network cables (patch cable and
cross-over cable). Both are described below.
Patch Cable: Use the following method to make the network cable when the DVR is connected to
a network hub or switch.
End to end relationship of a direct cable
141