Chapter2 Installation; Check Dvr And Its Accessories; Hdd Installation - HIKVISION DS-8004HCI-S User Manual

Chapter2 Installation

2.1 Check DVR and its Accessories

Please follow the packing list in the packing box and carefully check the contents of the shipping
container. If any of the items is missing, please contact your dealer.

2.2 HDD Installation

Caution:
A factory recommended HDD should be used for this device.
When working with electrostatic sensitive devices such as a hard disk or the DVR unit, make sure
you use a static-free workstation. Any electrostatic energy coming in contact with the hard disk or
DVR main board can damage it permanently.
The DVR is without HDD when leaving factory. Based on the record schedule, you can calculate
the total capacity you need (refer to Appendix A). Please ask the specialist to disassembly the
DVR and install HDD.
Installing the hard disks must be performed by qualified personnel. Unauthorized installation of
hard disks may result in permanent damage of the disk and the recorder, and is performed at your
own risk.
Installing SATA HDD
1. Before installation of the HDD, switch the recorder off and unplug the power cable.
2. Place the recorder on a flat table, and make sure you take proper ESD precautions. Wear an
ESD bracelet at all times. A Philips screwdriver is required to disassemble and reassemble the
unit.
12