HIKVISION DS-8004HCI-S User Manual page 90

7. Alarm schedule setup: When there is a view tampering alarm present, the DVR will
handle the alarm based on the schedule selected. You can set 4 periods for each day of the
week. You can copy the schedule of one day to other days.
Note: Time periods may not overlap. You must reboot the DVR before the settings take effect.
8. Setup alarm policy: If a view tampering alarm occurs while the schedule is active the
DVR will respond based on the policy Selected. You can select one or more of the following:
"On Screen Warning", "Audible tone", "Upload to Center", "Trigger Alarm Output" and
"Send E-mail". Use the [] [] and [EDIT] key to enable or disable selections. "×" is disable
and "" is enable.
9. Save alarm setup: After selecting the setup parameters, press "Confirm" to return
"Camera Input Adjustment" menu. In the "Camera Input Adjustment" menu press "Confirm"
to save the setup and return to the main menu, or "Cancel" or [Esc] to abort.
10. Save all cameras: If you want to setup additional cameras, repeat steps two through eight.
In "Image Setup" menu, press "Confirm" to save all cameras parameters. Press "Cancel" key
or [ESC] key to abort.
90