HIKVISION DS-8004HCI-S User Manual page 69

Screen Setup Options:
1. Select Out: Use "Select Out" to select the main or Spot outputs:
2. Preview Mode (Live view mode): Use the [↑] [↓] keys to select the desired screen
configuration for edit. The menu allows you to select screen formats and insert camera
numbers as desired. The number of available formats depends on the number of camera
inputs available (1, 4, 9, 12 and 16 displays are available in 16 channel units) See
"Layout" below for setup details.
3. Switch Time: This control sets the sequence dwell time in the sequence mode. Each
sequencing view will remain on the screen for the amount of time selected. Options
include 5, 10, 20, 30 seconds, 1, 2, 5 minutes and never (sequence off). For example:
With a 16 channel DVR, if you select "4 Screen" mode and a "20 Second switch time.
The DVR display will change four camera displays every 20 seconds (1-4, 5-8, 9-12, and
13-16).
4. Audio preview: If you enable audio (""), when you view a single camera the DVR will
play the audio associated with that channel.
5. Layout: The menu provides a window divided into sections. The window sections
correspond to the screen format selected (1, 4, 9, 12 and 16). Each individual section
represents one camera. You can move the "Active Window" to each section. Use the
camera selection bar to insert the appropriate camera in the desired cameo. For example:
Select the 16 camera mode (16- screen in the mode selection). Move the "Active
69