HIKVISION DS-8000AHI Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. DS-8000AHI Series
  6. User manual
HIKVISION DS-8000AHI Series User Manual

HIKVISION DS-8000AHI Series User Manual

Hikvision ds-8000ahi/ahli/ahfli-s embedded net dvr user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR
Thank you for purchasing our DS-8000AHI/AHLI/AHFLI-S embedded Net DVR. This
manual is applicable to DS-8000AHI/AHLI/AHFLI-S series embedded Net DVR. Please read this
User Manual carefully to ensure that you can use the device correctly and safely.
The contents of this manual are subject to change without notice.
DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR

User Manual

(V2.1)
Page
Total
1
116

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-8000AHI Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-8000AHI Series

Summary of Contents for HIKVISION DS-8000AHI Series

  • Page 1: User Manual

    (V2.1) Thank you for purchasing our DS-8000AHI/AHLI/AHFLI-S embedded Net DVR. This manual is applicable to DS-8000AHI/AHLI/AHFLI-S series embedded Net DVR. Please read this User Manual carefully to ensure that you can use the device correctly and safely. The contents of this manual are subject to change without notice.

  • Page 2: Table Of Contents

    HDD Installation ....................... 8 Rear Panel Description ....................9 Chapter3 Operational Instructions ..................13 Front Panel ......................13 3.1.1 DS-8000AHI-S Front Panel ................13 3.1.2 DS-8000AHLI/AHFLI-S Front Panel ............. 15 IR Controller ......................18 Menu Description ....................20 3.3.1 Menu Items ..................... 20 3.3.2...
  • Page 3 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.16 RS232 setup ......................82 5.17 Exceptions ....................... 87 5.18 Transaction Information ..................88 Chapter6 Utilities ........................92 Save Parameters ...................... 92 Restore Parameters ....................93 Upgrade ........................93 Hard Disk Management ..................94 Clear Alarm Out ...................... 95 Reboot ........................

  • Page 4: Attentions

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Attentions Before using the product, please make sure that:  Please don’t place container filled with liquid on the product.  Please keep the device enough space for ventilation.  Please make sure the product works in proper temperature and humidity.

  • Page 5: Chapter1 Product Introduction

    TCP/IP. The firmware is burned into the flash, making the system more stable and reliable. DS-8000AHI/AHLI/AHFLI-S series device has the features of both digital video recorder (DVR) and digital video server (DVS). It can work stand alone, and also be used to build a powerful surveillance network.
  • Page 6 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR  Support Event Recording Para. Setup  Support backup the recorded files and clips with USB memory, USB HDD, USB CD-R/W and USB DVD-R/W. Preview and playback  Support BNC analog moniotor and VGA output. ...
  • Page 7 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR control serial devices.  Support SADP protocol  Support bi-direction voice talk or one-way voice broadcast.  Support IE to preview and configure DVR.  Support remote log query Development support  Provide network SDK. ...

  • Page 8: Chapter2 Installation

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Chapter2 Installation Warning: Before you install the DVR, please make sure the power of DVR is switched off. 2.1 Checking the DVR and Its Accessories When you get the product, check that all the items are included in your product package.

  • Page 9: Rear Panel Description

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 2.3 Rear Panel Description Notice: Please refer to real product for different model. Take DS-8004AHL-S for example: Index Physical Interface Description Power Adapter ATX Standard. 220V or 110V option. Power Output DC Output +12V/1A for camera.
  • Page 10 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4 video input, BNC interface. 4 audio input, BNC interface. The 4 audio input is also used as Line in for voice talk. AOUT Audio output, BNC interface USB Interface Connecting USB memory disk, USB HDD, USB CD-R/W VGA Interface Connecting VGA display.
  • Page 11 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 2.4 Connecting to alarm in/out device The alarm input is switch signal， if the alarm input is not switch signal, such as voltage signal, then please follow the connection method below. If alarm output interfaces are connect to DC/AC load, then please refer the suggestion below.
  • Page 12 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Illustration of cable connection Device supplies the curved needle plug for signal cable connection, here is the process： 1、unplug the green Curved needle plug in the ALARM IN and ALARM OUT interface; 2、un-fasten the screws in the curved needle plug, then put the signal cable into little metal box and then fasten the screws.

  • Page 13: Chapter3 Operational Instructions

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Chapter3 Operational Instructions 3.1 Front Panel 3.1.1 DS-8000AHI-S Front Panel Index Type Name Description Status READY DVR is ready. Lamps STATUS Green means you can use IR remote control. ALARM Red means there is alarm. MODEM Green means modem connection and dial-up successful.
  • Page 14 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR transmission. Channel2 working status. Green means recording; Red means network transmission; Orange means recording and network transmission. Channel3 working status. Green means recording; Red means network transmission; Orange means recording and network transmission. Channel4 working status. Green means recording; Red means network transmission;...

  • Page 15: Ds-8000Ahli/Ahfli-S Front Panel

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Pause playback. Input Keys Numeric Input number, lower case, upper case character and symbols. Keys 3.1.2 DS-8000AHLI/AHFLI-S Front Panel Index Type Name Description Status POWER Power indicator lamp. Green means DVR is working; Red Lamps means DVR is powered off. No light means no power is supplied.
  • Page 16 Composite of【A】and【0】. Display For local display. Note: Please refer to DS-8000AHI-S about the compound keys functions. Examples of compound keys’ usage: Used as function keys: If the lamp of NUMLOCK is off, the compounds keys can be used as function keys. They are defined as 【MENU】...
  • Page 17 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 【PREV】and【A】. Press【SHIFT】key to turn off NUMLOCK lamp when the lamp is on. Used as numeric keys: Press【SHIFT】to turn on NUMLOCK lamp when the lamp is off. In “Preview” and “PTZ control” mode, the compound keys can be used as numeric keys to select channel. In “Edit” mode, only in “Number”...

  • Page 18: Ir Controller

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 3.2 IR Controller Index Name Description POWER Turn off device. Enable/Disable IR remote control Numeric Keys Same as numeric keys of front panel. EDIT Same as EDIT key of front panel. Same as A key of front panel.
  • Page 19 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Same as ESC key of front panel. Reserved Same as【F1】key of front panel. IRIS, FOCUS ZOOM for camera Camera control control. Same as【F2】key of front panel. Loading the batteries into the IR controller Remove the battery cover.

  • Page 20: Menu Description

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 3.3 Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Unit name Camera name and position setup Device ID Adjust Brightness, Contrast, Hue Require password and Saturation Screen saver OSD Display mode, position and...

  • Page 21: Menu Operation

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Restore parameters Upgrade firmware Text input mode HDD management ATM IP address Transaction Utilities Clear alarm output ATM type Reboot Text information Power off View log System information 3.3.2 Menu Operation How to enter into menu mode ...

  • Page 22: Character Input

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame” which is pointing to the selected item. This “Active Frame” can be moved by 【】or【】keys. There are such kinds of menu items: Check Box: Provide 2 options, “”...
  • Page 23 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Press 【A】 key to change input methods. You can select “number”, “Uppercase”, “Lowercase” or “Symbol”. Uppercase Lowercase Symbol There are 24 symbols in all. They are divided into 4 pages, and you can use【0】key to turn over page.

  • Page 24: Chapter4 Basic Operation Guide

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Chapter4 Basic Operation Guide 4.1 Power on Note: Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface. Otherwise, you can not see graphic user interface and can not operate.
  • Page 25 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Camera record status is following: Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green Real time recording Blue Motion detect recording External alarm recording Page Total...
  • Page 26 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Camera alarm status is following: Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&External alarm Green No alarm Blue Motion alarm External alarm Press numeric keys to switch over individual camera preview.

  • Page 27: User Name And Password

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4.3 User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified. The administrator can create 15 users and define their user rights.
  • Page 28 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using【】/【】keys. Press【ENTER】 key to enter into following password menu: Step 3: Input new password Press【EDIT】key to enter into edit box. You can use numeric keys to input new password.

  • Page 29: Ptz Control

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4.4 PTZ Control Note: The user must have the “PTZ control” right. PTZ control interface In preview mode, press【PTZ】key, in the login dialog, select one user name and input the correct password, you can enter into PTZ control interface.
  • Page 30 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Adjust preset description In PTZ control mode, press【REC/SHOT】key, and press the preset number (three numeric keys), DVR will adjust the corresponding preset number. Repeat pressing【REC/SHOT】key, and press the preset number, DVR will adjust that preset number.

  • Page 31: Manual Record

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4.5 Manual Record Note: The user must have the corresponding right, DVR has HDD and HDD is formatted already. Manual record In preview mode, press【REC】key, in the pop-up login dialog, select the name and input the correct password, you can enter into the “Manual Record”...

  • Page 32: Playback

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4.6 Playback Note: The user msut have “Playback” right. Playback interface In preview mode, press【PLAY】key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback” interface. In menu mode, press【PLAY】key, you can enter into “Playback” interface directly.
  • Page 33 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Main Channel: Use【↑】or【↓】key to select one channel. Second: If DVR support 2-ch playback, you can use【↑】or【↓】key to select the second channel except the main channel. These two channels can be playback synchronously. If you select the second channel as none, only the main channel is playback.
  • Page 34 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR If the matched files are more than 8, you can use “Page No.” to select page (use numeric keys or【↑】 【↓】keys to select page). In the file list box, use【↑】 【↓】keys to move the scroll bar to the file, press 【ENTER】...
  • Page 35 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR One Channel Playback Two Channels Playback At the bottom of image, there is an information bar and the following information is included: Volume, Play Progress, Play Speed, Played Time and File Total Time.  Display/Hide information bar: 【MENU】...
  • Page 36 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR  Playback switch: When in 2-ch playback, press【PREV】to switch between main channel and second channel. Note: When DVR is busy, if you select high play speed, maybe there is difference for actual play speed. Exit playback In playback interface, press【ESC】key to enter into preview mode.

  • Page 37: Backup Recorded Files

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4.7 Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback interface, you can backup the recorded files. In the preview mode, press【PLAY】key, in the login dialog, select username and input the correct password, you can enter into the playback interface.
  • Page 38 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 2: Select the files that you want to backup In the file list box, use 【↑】 or 【 ↓】 keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press 【 EDIT】 key to select it. The symbol “” is the selection tag. You can use the same method to select other files you want to backup.
  • Page 39 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Notes: SATA HDD for auto backup needs to be connected to the 1 SATA interface; SATA HDD for auto backup needs to be formatted by selecting “format” in the auto backup menu instead of in the HDD management menu.
  • Page 40 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 3. Select “Auto Backup” and enter the submenu shown as below: 4. Enable the auto backup: Pressing “confirm” or “edit” button to enable(“”) or disable(“×”) the function. 5. Select camera you want to auto backup by using button and enable(“”) it by...

  • Page 41: Voice Talk

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 4.8 Voice Talk 【VOIP】is not available. You can use client software to start talking with DVR. 4.9 Shut down DVR Note: Do not switch off the power directly in case of damaging HDD. The correct step is using “Power Off”...
  • Page 42 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR more; otherwise, DVR can not be shut down. Shut down DVR abnormally Use the power switch of real panel When DVR is run, if you switch off the power, the HDD in DVR will be damaged. Please avoid such operation.

  • Page 43: Chapter5 Parameters Setup Guide

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Chapter5 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters take into effective. Other parameters do not need to reboot.
  • Page 44 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR In the user name list box, only “admin” is existed. You can use【→】key, move “Active Frame” to password edit box, and press 【 EDIT】 key to enter into edit status. Press numeric keys to input the new password. The password is only combined by 16 numerals at most. After you finish inputting password, press【ENTER】key to exit.

  • Page 45: Add And Delete User

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.2 Add and Delete User Enter into “User Management” interface. Add user The steps are following: Step 1: Enter into “User Management” menu Please refer to chapter 5.1 Step 2: Add new user name In the “User Management” menu, move “Active Frame” to “Add” button and press 【ENTER】...
  • Page 46 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 3: Setup the password for new user After you add one new user, the password is null. You can skip this step if you do not want to change the password. In the users list box of “User Management” menu, use【】 【】keys to select the new user name, then use【】key to the password edit box.
  • Page 47 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Operational rights are divided into “Local Rights” and “Remote Rights”. You can assign the necessary rights to the user. Use 【】 【】 key to move “Active Frame” to the corresponding right items, press 【ENTER】 or 【 EDIT】 key to enable or disable the item. “” means assigning the right to that user.
  • Page 48 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Delete user In “User Management” interface, you can use 【 】 【 】 keys to select one user, then use 【 】 , move “Active Frame” to “Del” button, press【ENTER】, in the pop-up confirmation dialog, press “Confirm”...

  • Page 49: Unit Name And Device Id

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.3 Unit Name and Device ID Unit name In the “Display” menu: There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press【EDIT】key to enter into edit status, you can modify the unit name.

  • Page 50: Video Output Standard And Vga Setup

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.4 Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output. You can modify video output standard to match video input.

  • Page 51: Osd Setup

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.5 OSD Setup OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
  • Page 52 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Display mode: There are several display modes: Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active Frame” to “OSD” item, you can select one mode. Display position and format: Move “Active Frame” to “Position” button on the right side of “OSD”, press 【ENTER】to enter into setup image, you can find there are 22*18 (for NTSC,...
  • Page 53 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR The steps of camera name setup: Step 1: Select one camera. Step 2: Move “Active Frame” to camera name edit box, press【EDIT】key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4).

  • Page 54: Video Parameters Setup

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.6 Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters such as brightenss, saturation, contrast and hue, etc. You can setup the camera individually, and also you can copy the video parameters of one camera to any other cameras.

  • Page 55: Mask Area Setup

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.7 Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup” menu: Step 2: Select one camera: You can use【】...
  • Page 56 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for NTSC), you can use【↑】 【↓】 【→】 【←】keys to move the yellow pane to your hope position and press【EDIT】key, the yellow pane will be turned into red, then you can use【↑】...

  • Page 57: View Tampering Alarm

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.8 View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1: Enter into “Image Setup” memu: Step 2: Select camera: Please use【】 【】keys to select one camera.
  • Page 58 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 6: Alarm schedule setup: When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy the schedule of one day to other days.

  • Page 59: Video Loss Alarm

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.9 Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【】...
  • Page 60 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 4: Setup alarm schedule: You can setup working schedule. Only when the video loss is happened in the schedule, DVR will response. Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters into effective.

  • Page 61: Motion Detection Alarm

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.10 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【】 【】key to select one camera. Step 3: Select motion detection sensitivity: On the right side of “Motion Det. Level” item, there is a list box.
  • Page 62 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR press【EDIT】, you will find the yellow pane is turned into black pane. You can use【↓】 【→】key to enlarge or shrink the black area. Press【EDIT】key to clear this part motion area. Press【Enter】key to save and return “Image” menu. Press【ESC】to cancel.
  • Page 63 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 6: Motion alarm record channel setup: When there is motion alarm happened, you can trigger related camera to start recording. In “Motion Alarm Handle” menu, you can select one or more record channels. Please use【ENTER】or【EDIT】key to enable the flag into “”.
  • Page 64 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Note: Motion alarm area can not be copied. If you want to disable motion alarm area and motion alarm policy, you just need to select the motion alarm sensitivity as “Off”. Page Total...

  • Page 65: Preview Properties

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.11 Preview Properties In “Preview” menu, you can setup preview mode, screen switch time, enable or disable audio preview and preview layout. Step 1: Enter into “Preview” menu: In the main menu, move “Active Frame” to “Preview”...

  • Page 66: Recording Setup

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR demand. Save setup: Press “Confirm” button to save preview properties. Press “Cancel” or 【ESC】 key to abort. 5.12 Recording Setup In main menu, there is an icon named “Recording”. You can enter into recording menu as following: “Recording”...
  • Page 67 Resolution: The higher resolution is, the clearer the image is. The resolution options from low to high are: QCIF, CIF. For DS-8000AHI/AHLI/AHFLI-S DVR: all channels can only max support CIF resolution. Note: If you change this resolution option, please reboot DVR to make it into effective.
  • Page 68 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR maybe the actual perrecord time is more than 5 seconds. On the other side, if the bit rate is high, and set “PreRecord Time” as “30 Seconds”, the actual prerecord time maybe is less than 30 seconds.
  • Page 69 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Motion&Alarm. For all day record mode, only one record type can be selected. Step 4: Copy to other days You can repeat step2 and step3 to setup for other days. Also you can copy the current day to other days.

  • Page 70: External Alarm Input And Relay Output

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 4: Copy to other days You can repeat step2 and step3 to setup for other days. Also you can copy the current day to other days. Step 5: Save Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters and return main menu.
  • Page 71 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 3: Enter into “Alarm in Handling” sub menu In the “Alarms” menu, there are two options for “Alarm Handling” item. One is “Ignore”, and the other is “Handle”. If you select “Handle” option, you can active “Policy” and “PTZ Linkage” buttons on right side. Move “Active Frame”...
  • Page 72 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR First select one camera, then select one of following PTZ linkage:  Preset: Set the flag as “” to enable preset, in the preset number edit box and input one preset number that has been setup already. Please refer to chapter 5.15 for preset setup.
  • Page 73 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR press【ENTER】key to enter into the corresponding schedule menu: Step 4: Setup alarm out schedule Like other schedule setup, you can set 4 time periods for one day and 7 days for one week.. When you finish setup, press “Confirm” button to return “Alarms”...

  • Page 74: Network Parameters

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note: If any network parameter is modified, you must save and reboot DVR to make it into effective. In main menu, move “Active Frame” to “Network” icon and press【ENTER】, you can enter into “Network”...
  • Page 75 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR NTP is used for synchronizing time with time server, time server is provided by NTP service provider, time.windows.com is a famous time server provided by Microsoft. NTP Host: NTP server name. DDNS: Currently supports two protocols provided by DDNS service supplier: www.dyndns.com and www.peanuthull.com.
  • Page 76 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR and exception information from DVR. You can use SDK to develop this center software. *NAS: Network access storage. DVR will regard network HDD as local HDD. If you enable this function, DVR will send and save the real time image to that network HDD.

  • Page 77: Ptz

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR *E-mail: This function enables image capture and sending emails to designated e-mail address (max 2 e-mail addresses at the same time) when abnormity occured. You can also modify email parameters as follows: Authentication: If your Email server asks for a user name and password when sending Email,...
  • Page 78 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR PTZ menu description Select channel: Select one PTZ camera. RS-485 parameters: Including baudrate, data bit, stop bit, parity, flow control, etc. These parameters must be the same as those of PTZ Protocol. PTZ address: Each PTZ has one different address.
  • Page 79 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR can support sequence function before you start to setup. You can save 16 sequnece. Cruise setup: Cruise is remembering the track of PTZ movement. Please make sure the PTZ you are using can support cruise function.
  • Page 80 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR In “Sequence” setup menu, first input the sequence number. The sequence is among 1 --- 16. Each sequence is made up of cruise points, and each cruise point includes preset number, dwell time and dwell speed. Dwell time is the time staying at that preset number. Dwell speed is the speed that PTZ is moved to that preset number.
  • Page 81 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press【ENTER】to save the operation track and return “Cruise” setup menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button.

  • Page 82: Rs232 Setup

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss【ENTER】key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
  • Page 83 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR net. Usename, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC.
  • Page 84 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port. You can use HyperTerminal or NetTerm to setup modem: AT&F ---- Retore default parameters (Generally, Modem is hard flow control)
  • Page 85 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Page Total...
  • Page 86 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup.

  • Page 87: Exceptions

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.17 Exceptions The exceptions can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL differ. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 88: Transaction Information

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 5.18 Transaction Information The DVR can actively obtain or passively receive the credit card number from ATM machine linked through network or serial port, and credit card number can be overlay on live video, recorded and playback. The following description indicates how to carry out relevant parameter setting according to different links to ATM machine.
  • Page 89 In this case, you must develop the software that is run in the ATM machine based on Hikvision protocol. The software will send the transaction information directly to the DVR. DVR will receive, analyse and overlay the text on live video.
  • Page 90 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR In the case, you must set the RS-232 of DVR as transparent channel mode as following: Software must be run in the ATM machine, and send the credit card number, transaction code to DVR through RS-232 port.
  • Page 91 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR In the case, you must set the RS-232 of DVR as transparent channel mode as following: Also, software must be run in ATM machine, and send command to DVR through RS-232 port based on Hikvision communication protocol. Page Total...

  • Page 92: Chapter6 Utilities

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Chapter6 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: 6.1 Save Parameters Save current parameters. You can reboot DVR to make them into effective.

  • Page 93: Restore Parameters

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 6.2 Restore Parameters Restore factory parameters for DVR. The IP address, gateway and port number will not be restored. 6.3 Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched.

  • Page 94: Hard Disk Management

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Input the ftp server IP and press【ENTER】key. DVR will connect with FTP server through network and download the firmware file. If you select “USB” mode, please make sure you connect one USB flash memory with DVR and the firmware file is in its root directory.

  • Page 95: Clear Alarm Out

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally. 6.5 Clear Alarm Out Clear the alarm output manually. 6.6 Reboot Reboot DVR. 6.7 Power Off Shut down DVR.
  • Page 96 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Type is divided into “Major type” and “Minor type”. Major type includes operation, alarm, exception and all. For operation major type, there are many minor types, including Power On, Shut Down, Abnormal Shut, Panel Login, Panel Logout, Panel Config, Panel File Play, Panel Time Play, Local...

  • Page 97: System Information

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Step 5: Press “Return” button back to “Utilities” menu. By Type&Date View one kind of log in the assigned time period. Step 1: Select “By Type&Time” for “Query” option to active “Major Type”, “Minor Type” “Start Time” and “Stop Time” items.

  • Page 98: Chapter7 Firmware Upgrade

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Chapter7 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. There are two cases that you need to upgrade DVR firmware. One is update old firmware.
  • Page 99 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog, input password “target” in “New Password” and “Verify Password”...
  • Page 100 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 7. Next time, you need not setup again, just double click and open “wftpd32.exe” to upgrade the DVR/DVS firmware. Page Total...

  • Page 101: Upgrade Mode

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR 7.2 Upgrade Mode Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software user manual for detail information. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need one host PC to run FTP server software and place firmware file (digicap), and make sure DVR and PC are in the same sub net.

  • Page 102: Appendix Ahdd Capacity Calculation

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for every hour, unit Mbyte.

  • Page 103: Appendix Bdvr Connect Cable Definition

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix B DVR Connect Cable Definition 1 RS-485 connect cable made method Material and tool One twist cable (8 pins), one standard RJ45 connector and one tool special for RJ45 RJ45 introduction Pin definition To make the connect cable according the follows. As to left point of RJ45 head, 1...
  • Page 104 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR The corresponding relationship of the direct cable (2) Use the following method to make the cross network cable when DVR is directly connected with client-end PC. The corresponding relationship of cross cable 3 RS-232 connect cable made method...
  • Page 105 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Carrier Detect Receive Data Transfer Data Clear Data Request to Send Terminal Device Ready Ground Null — — According to demand, the following three situations are considered to make the serial port plug-in according to the corresponding relationship of the pin definition.
  • Page 106 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Connection for RJ45 and DB9 25-pin to 9-pin converter internal connection is defined as following: Connection for DB25 and DB9 (3) When the serial port of DVR is connected with DCE device (like MODEM), one end...

  • Page 107: Appendix C Specification

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix C Specification Model DS-8002AHI-S DS-8002AHLI-S Video compression H.264 Preview resolution 4CIF (PAL: 704*576, NTSC: 704*480) Playback resolution CIF/QCIF LCD Screen 5” Synchronous playback 2-ch 3 Channels BNC (1.0Vp-p, 75Ω) Video input 1 Channel BNC (1.0Vp-p, 75Ω) Video output 1 Channel RCA (1.0Vp-p, 75Ω)
  • Page 108 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR CIF/QCIF Playback resolution 5” Synchronous Playback 2-ch 4 Channels BNC (1.0Vp-p, 75Ω) Video input 1 Channel BNC (1.0Vp-p, 75Ω) Video output 1 Channel RCA (1.0Vp-p, 75Ω) Frame rate (per CIF: 25(P)/30(N) fps channel) Video/Video&Audio Stream type Support dual stream 32Kbps~2Mbps, (Max.
  • Page 109 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR channel) Video/Video&Audio Stream type Support dual stream Bit rate 32Kbps~2Mbps, (Max. 8Mbps), user-defined 4 Channels BNC (2.0Vp-p, 1kΩ) Audio input 1 Channel BNC (linear, 600Ω) Audio output 1 Channel RCA (linear, 600Ω) Audio compression OggVorbis, 16Kbps 1 BNC (2.0Vp-p, 1kΩ)

  • Page 110: Appendix D Quick Search Function Table

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix D Quick Search Function Table Type Name Description Index User Create and delete users. System has one default management administrator. The administrator can create 15 users Safety and define their rights. function Password Modify password.
  • Page 111 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Remote Remote record real time stream. record Remote Remote playback the recorded files in DVR playback Download Download recorded files in DVR. Remote Remote upgrade firmware. upgrade Transparent Remote control serial device connected with serial 5.16 channel port of DVR.

  • Page 112: Appendix E Troubleshooting

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, Power cable is broken. “POWER” light in front Panel does not turn on, and fan Power supply is broken. does not work.
  • Page 113 DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR password, ect). Old player SDK (playm4.dll) Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification. If the circuit board is wet, dust on circuit board can cause a short circuit. The circuit board, plug and socket, housing fan and housing should be cleaned by brushing regularly.

  • Page 114: Appendix F Product Service

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix F Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for the damage caused by non personal acts).

  • Page 115: Appendix G Customer Information Card

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Appendix G Customer Information Card User’s Name r./Mrs. Company Name Post Address Postcode Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor Page Total...

  • Page 116: Total

    DS-8000AHI/AHLI/AHFLI-S Embedded Net DVR Suggestions: Page Total...

This manual is also suitable for:

Ds-8000ahli seriesDs-8000ahfli-sDs-8002ahi-sDs-8002ahli-sDs-8004ahi-sDs-8004ahli-s ... Show all

Table of Contents