HIKVISION DS-8004HCI-S User Manual page 121

Establish the dialup connection:
Select the Modem to be connected to the PC (similar to the dialup network connection).
Input the telephone number connected to the DVR modem.
Input the username and password. They must be the same as the DVR PPP setup.
During the dialup connection, a message displays: "verification of username and password." After
successfully verification, the message will be given "on process of register in PC". The process is
the same as the common dialup connection.
After successful dialup, the network will designate the "remote IP" address to the PC.
For example: The set 192.1.0.1. User can Ping-link the assigned IP address through Ping
command, and can Ping-link DVR. Please refer to the following picture.
121