HIKVISION DS-8004HCI-S User Manual page 95

Note: To enable the linked recording function the affected channels must be enabled in the
"Recording" menu. The schedule must be in an enabled time period (if selected) and the "Rec
Type" must be set to either "Motion Detection, or Motion/Alarm.
3. Motion alarm schedule: The motion schedule determines the time periods during which
motion alarms will be recognized by the DVR. Motion alarm responses include: "On
Screen Warning," "Audible tone," "Upload to Center" and "Trigger Alarm Output". You
can setup 4 time periods for one day of the week.
Note: Time periods may not overlap.
4. Motion alarm handling setup: You can select one or more response methods such as
"On Screen Warning", "Audible Warning", "Upload to Center", "Trigger Alarm Output"
and "Send E-mail".
Description: If "On Screen Warning" is enabled, and a motion alarm occurs while the DVR is in
live mode, the alarmed camera will display on the monitor. If more than one alarm is present, the
alarmed cameras will sequence at a ten second rate. When the motion alarms clear, the display
returns to the previous viewing mode.
5. Save motion alarm setup: Press "Confirm" to return to the "Image Setup" menu. In the
"Image Setup" menu, press "Confirm" to save the current camera parameters.
6. Save all cameras: You can repeat steps tow through eight to setup motion detection
parameters for other cameras. Also you can copy the parameters of one camera to any
other cameras.
Note: The Motion alarm area may not be copied to other cameras.
If you want to disable the motion alarm area and motion alarm policy, select motion alarm
sensitivity as "Off".
95