HIKVISION DS-8004HCI-S User Manual page 78

Note: Operational rights are divided into "Local Rights" and "Remote Rights". You can assign the
necessary rights to the user.
1. Use the [] [] keys to select items and press [ENTER] or [EDIT] to enable or disable
the item. "" means the right is assigned to that user.
2. After assignment, press the "Confirm" button to save the settings, or "Cancel" to abort.
User rights description:
Local Rights: Local rights are for local operation, such as the operation using front panel, IR
controller and RS-485 keyboard and PTZ control.
1. Record: Manual start/stop recording;
2. Playback: Local playback and backup the recorded files;
3. Parameters Setup: Local setup the DVR parameters;
4. Log: Local view of the DVR log;
5. Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
Remote Rights: Remote rights are similar to local rights, the exception being that you can
perform these functions from the remote software.
PTZ Control: Remote control PTZ;
1. Record: Remote manual start/stop recording;
2. Playback: Remote playback, download of recorded files from DVR;
3. Parameters Setup: Remote setup the DVR parameters;
4. Log: Remote view of the DVR log;
5. Utilities: Remote upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
6. Audio: Client talks with DVR;
7. Live view: Network live view;
8. Alarm: Remote control of DVR alarm output;
9. Local Video Out: Remote imitation of front panel operation;
10. Com Control: DVR RS-232 transparent channel function.
MAC address:
This MAC address is not the address of DVR. It is the MAC address of the PC that will access the
DVR. If the MAC address is set to all zeros the user may connect to the DVR from any remote PC.
78