Window" to one of the segments and press the [Enter] (or [EDIT]) key to enter the "Edit"
mode. Press numeric keys to input a camera for that section of the multi-screen display
("0" "1" for camera #1 on 16 channel units – "1" for camera #1 on units with less than ten
channels). The camera number will display in the window. You can arrange the display in
any camera order. If you press 0 or 00, the corresponding window will not display live
video.
6. Alarm/Aux Out: This configures the monitor that will switch to full screen on alarm.
7. Save the setup selections: Select "Confirm" to save the viewing configuration. Press
"Cancel" or [ESC] to abort.
5.3 Main and Spot Output Playback
Both the "Main" and "Spot" display can be used to playback the recorded files on the DVR HDD.
Press the [Main/Aux] key to enter "Main" or "Spot" control mode, and press the [PLAY] key to
enter "Playback" menu.
5.4 Main and Spot Output to Control PTZ
Press the Main and the Spot output may be used to perform PTZ control.
1. Press the [Main/Aux] key to select the desired output.
70