View Tampering Alarm - HIKVISION DS-8004HCI-S User Manual

6.7 View Tampering Alarm

With this function enabled, an alarm will be produced when the camera view is blocked.
1. Enter the "Camera Input Adjustment" menu.
2. Select a camera: Use [] [] keys to select a camera.
3. Reach the list dialog box next to "View Tampering".
4. Sensitivity Selection: Use the [] [] keys to select the sensitivity level. The
sensitivity options are: Low, Normal and High. Selecting one of them will active the
"Area Setup" and "Policy Setup" functions.
5. View tampering area setup: Move the "Active Window" to the "Area" button and press
[ENTER] to enter the area setup interface. The setup methods are the same as those used
for the mask area setup.
6. After setting up the area, press [ENTER] to return to the "Image Setup" menu, or [ESC]
to abort.
Note: Only one view tampering area can be setup per camera.
89