Sequence Setup - HIKVISION DS-8004HCI-S User Manual

6.14.5 Sequence Setup

Each sequence is made up of several preset positions. Each preset point includes a preset number,
dwell time and dwell speed. Please make sure the PTZ you are using can support the sequence
function before you start the setup. You can save 16 sequences.
1. In "PTZ" menu, select "Setup"
"Sequence" setup menu:
2. In the "Sequence" setup menu, first input the sequence number (1 – 16). Each sequence is
made up of a series of preset positions. Each "sequence" includes the preset number,
dwell time (how long it will stay in each position) and dwell speed (how long it takes to
move to the next sequence position). Press the "Add" button to add a preset point.
3. Press "Confirm" button to save the cruise point into the sequence.
4. After you finish the setup the sequence numbers, press "StartSeq" to check the current
sequence. Press "StopSeq" button to stop checking.
5. After you finish sequence setup, press "ESC" to return to the "PTZ" menu. In "PTZ"
menu, press "Confirm" to save the modification.
Please make sure the PTZ you are using can support the sequence function.
on the right side of "Sequence No" to enter the
115