HIKVISION DS-8004HCI-S User Manual page 104

1. Select the "PTZ Linkage" button to access the "PTZ Linkage" setup menu:
2. Select a camera and then select one of following PTZ linkage options:
•
Preset: Set the flag as "" to enable preset and enter the preset number in the presser
selection box. Please refer to chapter 6.14 for preset setup.
•
Sequence: Set the flag as "" to enable sequence and input the sequence number. Please
refer to chapter 6.14 for sequence setup.
•
Cruise (Pattern): Set the flag as "" to enable cruise (pattern). Please refer to chapter
6.14 for cruise (pattern) setup.
3. Press the "Confirm" button to save and return to the "Alarms" menu. Press "Cancel" to
abort and return "Alarms" menu.
Note: Please make sure that the PTZ you are using can support preset, sequence and cruise
(pattern) functions. Also make sure that you configure them in the PTZ menu. One external alarm
input can trigger multiple PTZ links.
4. Copy the parameters: You can copy the parameters of current alarm input to other
external input.
5. Save setup: In "Alarms" menu, press "Confirm" button to save the parameters. Press
"Cancel" button or [ESC] to abort.
Alarm relay output setup:
1. In the "Alarms" menu, use the [↑] [↓] keys to select an alarm output.
2. Select delay time: This feature selects the amount of time the alarm triggers remain after
104