6.14.6 Cruise (Pattern) Setup:
Cruise (often referred to as pattern) "remembers" a pre-selected series of camera movements. This
series of dome movements will take place when the Cruise/pattern number is selected.
1. In "PTZ" menu, select the "Setup" button to the right of "Cruise." This will activate the
Cruise setup menu.
2. Select "RecCru" to enter the "PTZ control" interface. You can control the PTZ with the
direction keys. Press [ENTER] to save the operation track and return to the "Cruise"
setup menu. Press "StartCru" button to repeat the PTZ track until you press "Stop"
button.
3. Select "Return" to return to the "PTZ" menu. In "PTZ" menu, press "Confirm" to save
the Pattern/cruise.
Please make sure the PTZ you are using can support the cruise (pattern) function.
116