HIKVISION DS-8004HCI-S User Manual page 94

•
[↑] [↓] [←] [→]: Move yellow pane to any position.
•
[EDIT]: Yellow - panel (position) changes to red (adjust panel size).
•
[→]: Right enlarge red pane;
•
[←]: Left shrink red pane;
•
[↓]: Down enlarge red pane;
•
[↑]: Up shrink red pane;
•
[PTZ]: Set whole screen as motion area;
•
[A]: Clear all motion areas;
•
[ENTER]: Save and return to "Image Setup" menu;
•
[ESC]: Cancel setup and return to "Image Setup" menu;
Motion Alarm Policy: This feature allows you to configure multiple alarm responses based on a
single alarm input.
1. In the "Camera Input Adjustment" menu, move the "Active Window" to the "Policy"
button to the far right of "Motion Det. Level" and press [ENTER] to access the "Motion
Alarm Handle" menu:
2. Motion alarm record channel setup: Once a motion alarm has been detected that
information can be used to trigger other alarm conditions. In the "Motion Alarm Handle"
menu you can select one or more channels to record based on a camera motion alarm
input. Use the [ENTER] or [EDIT] key to enable the flag ("").
94