HIKVISION DS-8000-S User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. DVR
  5. DS-8000-S
  6. User manual
HIKVISION DS-8000-S User Manual

HIKVISION DS-8000-S User Manual

Ds-8000-s series net dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing our embedded Net DVR. This manual is applicable for
DS-8000HCI-S and DS-8000HFI-S series Net DVR. Please read this User Manual carefully to
ensure that you can use the device correctly and safely.
The contents of this Manual are subject to change without notice.
User Manual of DS-8000-S Series Net DVR
DS-8000-S Series Net DVR

User Manual

(V2.0)
Page
Total
1
121

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-8000-S

Summary of Contents for HIKVISION DS-8000-S

  • Page 1: User Manual

    User Manual of DS-8000-S Series Net DVR DS-8000-S Series Net DVR User Manual (V2.0) Thank you for purchasing our embedded Net DVR. This manual is applicable for DS-8000HCI-S and DS-8000HFI-S series Net DVR. Please read this User Manual carefully to ensure that you can use the device correctly and safely.

  • Page 2: Table Of Contents

    User Manual of DS-8000-S Series Net DVR Index Version Description ........................... 4 Chapter1 Product Introduction ....................6 Summary ........................6 Model Description ..................... 6 Features ........................6 Chapter2 Installation ......................... 9 Checking the DVR and Its Accessories ..............9 HDD Installation ....................... 9 Rear Panel Description ....................
  • Page 3 User Manual of DS-8000-S Series Net DVR Mask Area Setup ..................... 61 View Tampering Alarm ................... 63 Video Loss Alarm ....................65 6.10 Motion Detection Alarm ..................67 6.11 Preview Properties ....................70 6.12 Recording Setup ...................... 73 6.13 External Alarm Input and Relay Output ..............77 6.14...

  • Page 4: Version Description

    User Manual of DS-8000-S Series Net DVR Version Description Version2.0 built 070206: The new version firmware DVR has the following new features: 1. Support USB mouse Recommended USB mouse model list: Logitech: M-UV83 Benq: M800 ViewSonic: MC204 Philips: SPM4500BB/93 LG: LGIM-ML208 GlodFly: GF-OP718 Newmen: MS0270 (www.newmen.com.cn)
  • Page 5 User Manual of DS-8000-S Series Net DVR If you select “Backup” mode, in DVR “Playback” menu, you can select SATA HDD for backup. 5．Solved old version some bugs VGA black screen and Aux audio output issues Page Total...

  • Page 6: Chapter1 Product Introduction

    TCP/IP. The firmware is burned in the flash, more stable and reliable. DS-8000-S series device has both the features of digital video recorder (DVR) and digital video server (DVS). It can work stand alone, also be used to build a powerful surveillance network, widely used in bank, telecommunication, transportation, factories, warehouse, irrigation, etc.
  • Page 7 User Manual of DS-8000-S Series Net DVR Compressed video and audio are synchronous. You can select either mixed stream or only video stream. Support 4CIF, DCIF, 2CIF, CIF and QCIF resolution. Support multi area motion detection. Support OSD and changeable OSD position.
  • Page 8 User Manual of DS-8000-S Series Net DVR Network Support TCP, UDP, RTP, Multicast for network preview. Support PPPoE for board band dialup. Support PSTN for narrow band dialup. Support remote parameters setup. Alarm information can be sent to remote center.

  • Page 9: Chapter2 Installation

    User Manual of DS-8000-S Series Net DVR Chapter2 Installation Warning: Before you install the DVR, please make sure the power of DVR is switched off. Checking the DVR and Its Accessories When you get the product, check that all the items are included in your product package.

  • Page 10: Rear Panel Description

    User Manual of DS-8000-S Series Net DVR Rear Panel Description Notice: Please refer to real product for different model. 2.3.1 4-ch DS-8004HFI-S Rear Panel ESATA ALAR M O U T LI N E I N VO U T VAU X...

  • Page 11: 4-Ch Ds-8004Hci-S Rear Panel

    User Manual of DS-8000-S Series Net DVR External Alarm Input 4 sensor alarm in. Relay Output 2 replay output. Ground 100~240VAC AC Input Optional. Extend 1 internal SATA to E-SATA. E-SATA 2.3.2 4-ch DS-8004HCI-S Rear Panel Index Physical Interface Description Standard BNC.

  • Page 12: 8-Ch/16-Ch Hci-S/Hfi-S Rear Panel

    User Manual of DS-8000-S Series Net DVR RS-485 PTZ connection. Using T+/T- to connect PTZ. External Alarm Input 4 sensor alarm in. Relay Output 2 replay output. Ground 100~240VAC AC Input Optional. Extend 1 internal SATA to E-SATA. E-SATA 2.3.3 8-ch/16-ch HCI-S/HFI-S Rear Panel...
  • Page 13 User Manual of DS-8000-S Series Net DVR Main video output Main monitor for video and menu. Main audio output Main monitor for audio preview and playback. Line In Audio line input for voice talk. VGA Interface VGA display. Connect RS-232 devices. Refer to Appendix B for pin RS-232 definition.

  • Page 14: External Alarm In/Out Connection

    User Manual of DS-8000-S Series Net DVR External Alarm In/Out Connection Alarm input port (drp node): G (GND): Conenct the GND of sensor. 1~8: Alarm input, support normal open/normal close. 0: Reserved. Alarm output: 1G~4G: 4 relay output. Alarm output connection Please note the usage of jumper JJ1.

  • Page 15: Chapter3 Operational Instructions

    User Manual of DS-8000-S Series Net DVR Chapter3 Operational Instructions Front Panel This picture is the front panel of DS-8000-S series Net DVR. Index Type Name Description IR receiver. State Show channel 1-8 status. Green means recording; Red means Lamps network transmission;...
  • Page 16 User Manual of DS-8000-S Series Net DVR 2. 【AUTO】in PTZ mode. EDIT 1. Manual record; 2. 【SHOT】in PTZ mode (adjust preset). 1. In edit state, delete current cursor character; 2. 【IRIS+】 in PTZ control; or × to enable or disable.
  • Page 17 User Manual of DS-8000-S Series Net DVR or × to enable or disable; 2. Select 3. Pause playback. Page Total...

  • Page 18: Ir Controller

    User Manual of DS-8000-S Series Net DVR IR Controller Index Name Description POWER Turnoff device. Enable/Disable IR remote control Numeric Keys Same as numeric keys of front panel. EDIT Same as EDIT key of front panel. Same as A key of front panel.
  • Page 19 User Manual of DS-8000-S Series Net DVR Same PTZ key of front panel. Same as ESC key of front panel. Reserved Same as【F1】key of front panel. IRIS, FOCUS ZOOM for lens Lens control control. Same as【F2】key of front panel. Loading the batteries into the IR controller Remove the battery cover.

  • Page 20: Menu Description

    User Manual of DS-8000-S Series Net DVR Menu Description 3.3.1 Menu Items Menu Name Function Menu Name Function Camera name and position setup Video standard Adjust Brightness, Contrast, Hue Brightness and Saturation Menu transparency OSD Display mode, position and Unit name...

  • Page 21: Menu Operation

    User Manual of DS-8000-S Series Net DVR Restore parameters Upgrade firmware Text input mode HDD management ATM IP address Clear alarm output Transaction Utilities ATM type Reboot Text information Power off View log System information 3.3.2 Menu Operation How to enter into menu mode Press【MENU】key to enter into DVR main menu.
  • Page 22 User Manual of DS-8000-S Series Net DVR 【ENTER】key to enter into the secondary menu. For example, move the “Active Frame” to “Image” icon, press 【ENTER】to enter into the secondary menu as following: Each menu contains different kinds of items. There is a small rectangular frame named “Active Frame”...
  • Page 23 User Manual of DS-8000-S Series Net DVR to parent menu. Press 【 Cancel】 button to cancel and return to parent menu. The button in grey means it can be operated only after it is enabled. How to exit menu Press【PREV】key to exit menu and return to preview mode.

  • Page 24: Character Input

    User Manual of DS-8000-S Series Net DVR Character Input In the menu interface, if you enter into edit status (for example, in the “camera name” edit box), at the bottom of screen, the input status is appeared: Here it means you can press numeric keys to input digital number.

  • Page 25: Chapter4 Basic Operation Guide

    User Manual of DS-8000-S Series Net DVR Chapter4 Basic Operation Guide Power on Note: Please make sure the power supply matches DVR and AC cable connected correctly. Before switch DVR on, please connect one monitor with VOUT or VGA interface.
  • Page 26 User Manual of DS-8000-S Series Net DVR Press【A】key to display or hide the camera status bar. Camera record status is following: Icon Icon Color Status Description White No video signal Yellow Vdieo input Pink Manual recording Green Real time recording...
  • Page 27 User Manual of DS-8000-S Series Net DVR Camera alarm status is following: Icon Icon Color Status Description White Video signal lost Yellow View tampering alarm Pink Motion&External alarm Green No alarm Blue Motion alarm External alarm Press numeric keys to switch over individual camera preview. If DVR has less than 10 channels, press one numeric key to switch corresponding channel.

  • Page 28: User Name And Password

    User Manual of DS-8000-S Series Net DVR User name and password Note: When DVR is delivered from factory, there is only one default administrator named “admin”, and password is “12345”. The administrator’s name can not be modified, while the password can be modified. The administrator can create 15 users and define their user rights.
  • Page 29 User Manual of DS-8000-S Series Net DVR Setp 2: Enter into password modification menu Move the “Active Frame” to “Password” icon by using【 】/【 】keys. Press【ENTER】 key to enter into following password menu: Step 3: Input new password Press【EDIT】key to enter into edit box. You can use numeric keys to input new password.

  • Page 30: Ptz Control

    User Manual of DS-8000-S Series Net DVR modified successfully, you will get the main menu. Or an error dialog will be pop up. You can repeat step 3 to modify again. PTZ Control Note: The user must have the “PTZ control” right.
  • Page 31 User Manual of DS-8000-S Series Net DVR Direction control keys: 【↑】,【↓】,【←】,【→】; 【ZOOM+】,【ZOOM-】; ZOOM control keys: 【FOCUS+】,【FOCUS-】; FOCUS control keys: 【IRIS+】,【IRIS-】; IRIS control keys: 【REC/SHOT】; Adjust preset keys: 【PLAY/AUTO】; Auto control key: 【WIPER/MENU】; Wiper control key: 【LIGHT/F1】; Light control key: Auxiliary device control key:【AUX/F2】...

  • Page 32: Manual Record

    User Manual of DS-8000-S Series Net DVR Manual Record Note: The user must have the corresponding right, DVR has HDD and HDD is formatted already. Manual record In preview mode, press【REC】key, in the pop-up login dialog, select the name and input the correct password, you can enter into the “Manual Record”...

  • Page 33: Playback

    User Manual of DS-8000-S Series Net DVR Press【PLAY】key to enter into playback menu. Press【PTZ】key to enter into PTZ control mode. Playback Note: The user must have “Playback” right. Playback interface In preview mode, press【PLAY】key, in the pop-up login dialog, select username and input correct password, you can enter into “Playback”...
  • Page 34 User Manual of DS-8000-S Series Net DVR If DVR only supports one channel playback, you can not select second channel. If DVR can support two channels playback, you can select second channel. Main Channel: Use【↑】or【↓】key to select one channel. Second: If DVR support 2-ch playback, you can use【↑】or【↓】key to select the second channel except the main channel.
  • Page 35 User Manual of DS-8000-S Series Net DVR Three kinds of playback mode 1. Search and playbck file: In the playback interface, you can select main channel, second channel (2-ch palyback), record type, time section. Move “Active Frame” to “Search” button and press【ENTER】key, DVR will search and list the matched files.
  • Page 36 User Manual of DS-8000-S Series Net DVR Operation when playback Playback picture: One Channel Playback Two Channels Playback At the bottom of image, there is an information bar and the following information is included: Volume, Play Progress, Play Speed, Played Time and File Total Time.
  • Page 37 User Manual of DS-8000-S Series Net DVR 8X and MAX). Use【↓】to decrease play speed (1/2X, 1/4X, 1/8X and Frame by Frame) Pause/Continue: Press 【ENTER】to pause/continue playback. If played frame by frame, Press【ENTER】to paly one frame. Copy segment:【EDIT】 Exit: 【ESC】 Playback switch: When in 2-ch playback, press【PREV】to switch between main channel and second channel.

  • Page 38: Backup Recorded Files

    User Manual of DS-8000-S Series Net DVR Backup Recorded Files Note: The user must have “Playback” right. Please connect with backup devices before you start to backup. In the playback interface, you can backup the recorded files. In the preview mode, press【PLAY】key, in the login dialog, select username and input the correct password, you can enter into the playback interface.
  • Page 39 User Manual of DS-8000-S Series Net DVR Step 2: Select the files that you want to backup In the file list box, use 【 ↑】 or 【 ↓】 keys to move the scroll bar. When the scroll bar stays at the file you wan to backup, press 【...

  • Page 40: Shut Down Dvr

    User Manual of DS-8000-S Series Net DVR such case, each channel can backup 30 segments so 60 segments can be backup for two channels. Playback the video segment You can use our file player software to playback the video segment in PC. You can find the player software in attached CD.
  • Page 41 User Manual of DS-8000-S Series Net DVR If DVR is shut down correctly, the【POWER】lamp is in red. Note: When message of “Shut down…” is appeared, please do not press【POWER】key any more, otherwise, DVR can not be shut down. Shut down DVR abnormally Use the power switch of real panel When DVR is run, if you switch off the power, the HDD in DVR will be damaged.

  • Page 42: Chapter5 Main And Aux Output Function

    User Manual of DS-8000-S Series Net DVR Chapter5 Main and Aux Output Function Main and aux output DS-8008HCI-S, DS-8012HCI-S, DS-8016HCI-S, DS-8008HFI-S and DS-8016HFI-S series DVR has both one main output and one aux output. You can use main video output to enter into DVR menu as following, while aux output can not display DVR menu.

  • Page 43: Main And Aux Output Preview

    User Manual of DS-8000-S Series Net DVR Main and Aux output preview You can use “Main” output to enter into DVR menu, setup both “Main” and “Aux” output preview properties. Please press 【Mian/Aux】 button to enter into “Main” output control mode, then press 【Menu】...
  • Page 44 User Manual of DS-8000-S Series Net DVR Preview mode: For preview mode item, you can use 【 ↑】 【 ↓】 key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen”...
  • Page 45 User Manual of DS-8000-S Series Net DVR After you define the camera preview order, you can select preview mode to meet your demand. Save setup: Press “Confirm” button to save preview configuration. Press “Cancel” or 【ESC】key to abort. Whether in “Main” or “Aux” output control mode, you can press 【PREV】button to enter into live preview and change preview screen mode.

  • Page 46: Main And Aux Output Playback

    Both “Main” and “Aux” output can be used to playback the recorded files on DVR HDD. Press 【Main/Aux】 button to enter into “Main” or “Aux” control mode, and press 【PLAY】 button to enter into “Playback” menu. Please refer to “User Manual of Hikvision Embedded Net DVR” for playback information.

  • Page 47: Main Or Aux Output To Control Ptz

    Main or Aux output to control PTZ You can press 【Main/Aux】 button to enter into “Main” or “Aux” output control mode and press 【PTZ】 button to control one PTZ. Please refer to “User Manual of Hikvision Embedded Net DVR” for PTZ control information.

  • Page 48: Chapter6 Parameters Setup Guide

    User Manual of DS-8000-S Series Net DVR Chapter6 Parameters Setup Guide Only the users that have “Parameters Setup” right need read this chapter. When the following parameters are modified and saved, you must reboot the DVR to make the new parameters take into effective.
  • Page 49 User Manual of DS-8000-S Series Net DVR Move “Active Frame” to “User” icon, press【ENTER】key to enter into “User Management” menu. In the user name list box, only “admin” is existed. You can use 【 →】 key, move “Active Frame” to password edit box, and press【EDIT】key to enter into edit status. Press numeric keys to input the new password.

  • Page 50: Add And Delete User

    User Manual of DS-8000-S Series Net DVR Add and Delete User Enter into “User Management” interface. Add user The steps are following: Step 1: Enter into “User Management” menu Please refer to chapter 5.1 Step 2: Add new user name In the “User Management”...
  • Page 51 User Manual of DS-8000-S Series Net DVR In the users list box of “User Management” menu, use【 】 【 】keys to select the new user name, then use【 】key to the password edit box. Press【EDIT】key to enter into edit box, use numeric keys to input the new password.
  • Page 52 User Manual of DS-8000-S Series Net DVR User rights description “Local Rights”: Local rights are for local operation, such as the operation using front panel, IR controller and RS-485 keyboard. PTZ control: Locally control PTZ; Record: Manual start/stop recording; Playback: Local playback and backup the recorded files;...
  • Page 53 User Manual of DS-8000-S Series Net DVR Page Total...

  • Page 54: Unit Name And Device Id

    User Manual of DS-8000-S Series Net DVR Unit Name and Device ID Unit name In the “Display” menu: There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move “Active Frame” to unit name edit box, press【EDIT】key to enter into edit status, you can modify the unit name.

  • Page 55: Video Output Standard And Vga Setup

    User Manual of DS-8000-S Series Net DVR Video Output Standard and VGA Setup Video output standard There is one VOUT BNC connector at the rear panel of DVR. It is used to connect with analog monitor and can support PAL or NTSC video output. You can modify video output standard to match video input.

  • Page 56: Osd Setup

    User Manual of DS-8000-S Series Net DVR OSD Setup OSD is abbreviation of “On Screen Display”. For our embedded DVRDVS, it includes displaying system time and camera name. OSD settings include: System time, time format, time display position, camera name, camera name display position, etc.
  • Page 57 User Manual of DS-8000-S Series Net DVR Display mode: There are several display modes: Opaque&Steady, Transparent&Steady, Transparent&Flashing, Opaque&Flashing, Move “Active Frame” to “OSD” item, you can select one mode. Display position and format: Move “Active Frame” to “Position” button on the right side of “OSD”, press 【ENTER】to enter into setup image, you can find there are 22*18 (for NTSC,...
  • Page 58 User Manual of DS-8000-S Series Net DVR The steps of camera name setup: Step 1: Select one camera. Step 2: Move “Active Frame” to camera name edit box, press【EDIT】key to enter into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4).
  • Page 59 User Manual of DS-8000-S Series Net DVR position is fixed, press【ENTER】and return “Image Setup” menu, and press “Confirm” button to save it. In the “Image Setup” menu, perss “Cancel” button or【ESC】key, you can abort the modification. Page Total...

  • Page 60: Video Parameters Setup

    User Manual of DS-8000-S Series Net DVR Video Parameters Setup For different camera and different background, in order to get the best video image, you need to adjust video parameters such as brightenss, saturation, contrast and hue, etc. You can setup the camera individually, and also you can copy the video parameters of one camera to any other cameras.

  • Page 61: Mask Area Setup

    User Manual of DS-8000-S Series Net DVR Mask Area Setup In some cases, maybe you want mask the sensitive area. This area will not be preview and recorded. The mask area setup steps are following: Step 1: Enter into “Image Setup” menu: Step 2: Select one camera: You can use【...
  • Page 62 User Manual of DS-8000-S Series Net DVR Step 4: Setup mask area: In the mask area setup interface, there is one small yellow pane on the upper left side. For PAL camera, the whole screen is divided into 22*18 panes (22*15 for NTSC), you can use【↑】...

  • Page 63: View Tampering Alarm

    User Manual of DS-8000-S Series Net DVR View Tampering Alarm If you enable this function, when someone blocks the camera spitefully, DVR will make warning alarm. Step 1: Enter into “Image Setup” memu: Step 2: Select camera: Please use【 】 【 】keys to select one camera.
  • Page 64 User Manual of DS-8000-S Series Net DVR Step 6: Alarm schedule setup: When there is view tampering alarm happened, DVR will handle the alarm based on the schedule. You can set 4 periods for each day one week. Also you can copy the schedule of one day to other days.

  • Page 65: Video Loss Alarm

    User Manual of DS-8000-S Series Net DVR Video Loss Alarm When the video cable or camera has something wrong, the video image is lost. If you enable video loss alarm, in such case, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【...
  • Page 66 User Manual of DS-8000-S Series Net DVR Step 4: Setup alarm schedule: You can setup working schedule. Only when the video loss is happened in the schedule, DVR will response. Note: The 4 time periods can not be repeated. Please reboot DVR to make parameters into effective.

  • Page 67: Motion Detection Alarm

    User Manual of DS-8000-S Series Net DVR 6.10 Motion Detection Alarm If you enable this function, when there is motion detected, DVR will make alarm. Step 1: Enter into “Image Setup” menu: Step 2: Select camera: Use【 】 【 】key to select one camera.
  • Page 68 User Manual of DS-8000-S Series Net DVR The whole screen is divided into 22*18 panes (NTSC: 22*15). There is one yellow panel on the upper left side. The motion area setup steps are the same as that of mask area setup (refer to chapter 5.7).
  • Page 69 User Manual of DS-8000-S Series Net DVR 【↓】: Down enlarge red pane; 【↑】: Up shrink red pane; 【PTZ】: Set whole screen as motion area; 【A】: Clear all motion areas; 【ENTER】: Save and return “Image Setup” menu; 【ESC】: Cancel setup and return “Image Setup” menu;...

  • Page 70: Preview Properties

    User Manual of DS-8000-S Series Net DVR can trigger related camera to start recording. In “Motion Alarm Handle” menu, you can select one or more record channels. Please use【ENTER】or【EDIT】key to enable the flag into “ ”. Note: In order to make the cameras start recording, in “Recording” menu, you must enable recording schedule and set “Rec Type”...
  • Page 71 User Manual of DS-8000-S Series Net DVR Step 2: Preview properties: Preview mode: For preview mode item, you can use 【 ↑】 【 ↓】 key to select one mode. If DVR has only 1 channel, you can select only “1 Screen” option. If DVR has 4 channels, there are “1 Screen”...
  • Page 72 User Manual of DS-8000-S Series Net DVR Save setup: Press “Confirm” button to save preview properties. Press “Cancel” or 【ESC】 key to abort. Page Total...

  • Page 73: Recording Setup

    User Manual of DS-8000-S Series Net DVR 6.12 Recording Setup In main menu, there is an icon named “Recording”. You can enter into recording menu as following: “Recording” menu description: If HD Full: There are two options: “Overwrite” and “Stop recording”. If you select “Overwrite”...
  • Page 74 User Manual of DS-8000-S Series Net DVR If you select variable bit rate, DVR will adjust the actual bit rate according to the video movement. When there is not much movement, DVR will use low bit rate, while there is much movement, DVR will use high bit rate.
  • Page 75 User Manual of DS-8000-S Series Net DVR means enable. Schedule: When you enable recording function, you can setup recording schedule. Note: When the camera’s recording schedule is modified, you must reboot DVR to make it into effective. All day recording setup: Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“...
  • Page 76 User Manual of DS-8000-S Series Net DVR Step 5: Save Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters and return main menu. None all day recording setup Step 1: Enter into recording schedule menu In recording menu, use【ENTER】or【EDIT】key to enable record function (“ ” flag), press “Schedule”...

  • Page 77: External Alarm Input And Relay Output

    User Manual of DS-8000-S Series Net DVR Press “Confirm” back to “Recording” menu. Press “Confirm” again to save the parameters and return main menu. Note: If record type is “Motion Detect” or other related types, you must setup “Motion Detection” in order to trigger motion recording (refer to chapter 5.10).
  • Page 78 User Manual of DS-8000-S Series Net DVR and the other is “Handle”. If you select “Handle” option, you can active “Policy” and “PTZ Linkage” buttons on right side. Move “Active Frame” to “Policy” button and press 【ENTER】 key, you will enter into “Alarm in Handling” sub menu: Step 4: Alarm trigger record channel setup You can select channels to record for each alarm input.
  • Page 79 User Manual of DS-8000-S Series Net DVR Move “Active Frame” to “PTZ Linkage” button, press【ENTER】key to enter into “PTZ Linkage” setup menu: First select one camera, then select one of following PTZ linkage: Preset: Set the flag as “ ” to enable preset, in the preset number edit box and input one preset number that has been setup already.
  • Page 80 User Manual of DS-8000-S Series Net DVR 10 Minutes and Manual Stop. If you select “Manual’ option, the alarm output will not stop until you press “Clear Alarm” button in “Utilities” menu. So the actual alarm output time is made up of alarm input time and this delay time.

  • Page 81: Network Parameters

    User Manual of DS-8000-S Series Net DVR 6.14 Network Parameters If you want use network to access DVR, you must setup network parameters. Note: If any network parameter is modified, you must save and reboot DVR to make it into effective.
  • Page 82 User Manual of DS-8000-S Series Net DVR DNS server with that fixed Internet IP can receive DVR information and used to resolve DVR dynamic IP. This DNS is special software, not the normal domain name server. You can use the provided SDK to develop this DNS software.

  • Page 83: Ptz

    User Manual of DS-8000-S Series Net DVR “Network” menu. 6.15 PTZ There is one RS-485 port at DVR rear panel used for PTZ control. You can setup RS-485 parameters to match your PTZ protocol. In main menu, move “Active Frame” to PTZ icon and press【ENTER】key, you can enter into PTZ menu as following:...
  • Page 84 User Manual of DS-8000-S Series Net DVR iris. Move “Active Frame” to “Setup” button on the right side of “Preset” item, press【ENTER】 key to enter into preset setup menu. You can save 128 preset number. Please make sure the PTZ support preset function before you setup preset.
  • Page 85 User Manual of DS-8000-S Series Net DVR After deleting, press “Return” button to “PTZ” menu. In “PTZ” menu, press “Confirm” button to save all modification. Please make sure the PTZ you are using can support preset function. Sequence setup In “PTZ” menu, press “Setup” button on the right side of “Sequence No” item, you can enter into “Sequence”...
  • Page 86 User Manual of DS-8000-S Series Net DVR Press “RecCru” button, you will enter into “PTZ control” interface. You can start controlling PTZ with direction keys, press【ENTER】to save the operation track and return “Cruise” setup menu. Press “StartCru” button to repeat the PTZ track until you press “Stop” button.

  • Page 87: Rs232 Setup

    User Manual of DS-8000-S Series Net DVR 6.16 RS232 setup There is one RS-232 port at DVR rear panel. In main menu, move “Active Frame” to “RS232” icon and perss【ENTER】key, you enter into “RS232” setup menu: RS232 menu description RS-232 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
  • Page 88 User Manual of DS-8000-S Series Net DVR net. Username, password and Verify password: Only used when work mode is “PPP”. Used for login when remote PC dialup through PSTN. Phone: Only used when work mode is “PPP” and PPP mode is “Active”. It is the phone number of remote PC.
  • Page 89 User Manual of DS-8000-S Series Net DVR Step 3: Save setup In “Recording” menu, press “Confirm” button to save parameters. Step 4: Setup Modem used on DVR side Use DCE calbe to connect Modem with PC serial port. You can use HyperTerminal or NetTerm to setup modem: AT&F ---- Retore default parameters (Generally, Modem is hard flow control)
  • Page 90 User Manual of DS-8000-S Series Net DVR Page Total...
  • Page 91 User Manual of DS-8000-S Series Net DVR Step 3: Establish the dialup connection Select the Modem connected with PC just like the dialup network connection, input the telephone number connected with DVR’s modem. Input the username, password. They must be the same as that DVR PPP setup.

  • Page 92: Exceptions

    User Manual of DS-8000-S Series Net DVR 6.17 Exceptions The exceptions can be handled at present include: hard disk full, hard disk error, illegal access, IP address conflict, network failure, and NTSC/PAL differ. Enter into “Exceptions” menu: Including the following handle methods: Audible Warning: DVR beep warning.

  • Page 93: Transaction Information

    User Manual of DS-8000-S Series Net DVR 6.18 Transaction Information The DVR can actively obtain or passively receive the credit card number from ATM machine linked through network or serial port, and credit card number can be overlay on live video, recorded and playback.
  • Page 94 In this case, you must develop the software that is run in the ATM machine based on Hikvision protocol. The software will send the transaction information directly to the DVR. DVR will receive, analyse and overlay the text on live video.
  • Page 95 User Manual of DS-8000-S Series Net DVR In the case, you must set the RS-232 of DVR as transparent channel mode as following: A software must be run in the ATM machine, and send the credit card number, transaction code to DVR through RS-232 port.
  • Page 96 User Manual of DS-8000-S Series Net DVR In the case, you must set the RS-232 of DVR as transparent channel mode as following: Also, a software must be run in ATM machine, and send command to DVR through RS-232 port based on Hikvision communication protocol.

  • Page 97: Chapter7 Utilities

    User Manual of DS-8000-S Series Net DVR Chapter7 Utilities There are many tools in “Utilities” menu. Including “SavePara”, “RestorePara”, “Upgrade”, “Hard Disk”, “Stop Alarm Out”, “Reboot”, “Power Off”, “View Log” and “System Info”. Enter into “Utilities” menu: Save Parameters Save factory default parameters into FLASH memory. You can reboot DVR to make them into effective.

  • Page 98: Upgrade

    User Manual of DS-8000-S Series Net DVR Upgrade You can use this function to upgrade the firmware. Please confirm the language is matched. Press “Upgrade” icon, in the pop-up dialog, you can select either “FTP” or “USB” upgrade mode. If you select “FTP” mode, you will enter into “FTP Upgrade” menu: Input the ftp server IP and press【ENTER】key.

  • Page 99: Hard Disk Management

    User Manual of DS-8000-S Series Net DVR Hard Disk Management Check HDD work status Capacity, Free space, Stand by or not, Normal status or not. Format HDD Before formatting stop all recording. After formatting, you must reboot DVR, otherwise DVR will not work normally.
  • Page 100 User Manual of DS-8000-S Series Net DVR If you want to view the log based on default option, just press 【 ENTER】 key. DVR will list all matched information. Also you can select options to search (By Type, By Date, By Type&Date).
  • Page 101 User Manual of DS-8000-S Series Net DVR Step 4: When searching is finished, DVR will list all matched alarm information. In the list box, the information includes: Index, Occur Time, Major Type, Minor Type, Panel User, Net User, Host Address, Para. Type, Channel No, HDD No, Alarm In and Alarm Out. You can press “More Info”...

  • Page 102: System Information

    User Manual of DS-8000-S Series Net DVR System Information Press “System Info” icon in “Utilities” menu, you can get DVR system information: Page Total...

  • Page 103: Chapter8 Firmware Upgrade

    User Manual of DS-8000-S Series Net DVR Chapter8 Firmware Upgrade The DVR firmware is stored in FLASH ROM. You can use DVR upgrade function to write the firmware file (digicap) into FLASH. There are two cases that you need to upgrade DVR firmware. One is update old firmware.
  • Page 104 User Manual of DS-8000-S Series Net DVR Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog, input password “target” in “New Password” and “Verify Password”...
  • Page 105 User Manual of DS-8000-S Series Net DVR 7. Next time, you need not setup again, just double click and open “wftpd32.exe” to upgrade the DVR/DVS firmware. Page Total...

  • Page 106: Upgrade Mode

    User Manual of DS-8000-S Series Net DVR Upgrade Mode Use client software to upgrade the firmware file. You do not need to use ftp server software. Please refer to the client software user manual for detail information. Use “FTP” function of “Upgrade” sub menu in “Utilities” menu. You need one host PC to run FTP server software and place firmware file (digicap), and make sure DVR and PC are in the same sub net.

  • Page 107: Appendix Ahdd Capacity Calculation

    User Manual of DS-8000-S Series Net DVR Appendix A HDD Capacity Calculation Calculate total capacity needed by each DVR according to video recording (video recording type and video file storage time). Step 1: According to Formula (1) to calculate storage capacity that is the capacity of each channel needed for every hour, unit Mbyte.

  • Page 108: Appendix Bdvr Connect Cable Definition

    User Manual of DS-8000-S Series Net DVR Appendix B DVR Connect Cable Definition 1 RS-485 connect cable made method Material and tool One twist cable (8 pins), one standard RJ45 connector and one tool special for RJ45. RJ45 introduction Pin definition To make the connect cable according the follows.

  • Page 109: Connect Cable Made Method

    User Manual of DS-8000-S Series Net DVR (1) Use the following method to make the network cable when DVR is connected with network hub or switch. The corresponding relationship of the direct cable (2) Use the following method to make the cross network cable when DVR is directly connected with client-end PC.
  • Page 110 User Manual of DS-8000-S Series Net DVR tool for RJ45, one electric iron, and some soldering tin. Pin definition To make the RJ45 according to the following pin definition; I means DVR input, O means DVR output. Pin index Name...
  • Page 111 User Manual of DS-8000-S Series Net DVR Connection for RJ45 and DB9 25-pin to 9-pin converter internal connection is defined as following: Connection for DB25 and DB9 (3) When the serial port of DVR is connected with DCE device (like MODEM), one end...

  • Page 112: Appendix C Specifications

    User Manual of DS-8000-S Series Net DVR Appendix C Specifications Model name DS-8004HCI-S DS-8008HCI-S DS-8012HCI-S DS-8016HCI-S Video compression H.264 Preview resolution 4CIF real time (PAL: 704*576, NTSC: 704*480) Playback resolution CIF/QCIF real time Video input BNC (1.0Vp-p, 75Ω) Main video output 1 channel, BNC (1.0Vp-p, 75Ω)
  • Page 113 User Manual of DS-8000-S Series Net DVR Working temperature -10℃--＋55℃ Working humidity 10％--90％ Size 19” Standard (450mm*450mm*95mm) ≤8Kg (without HDD and CD-R/W) Weight DS-8000HFI-S Video compression H.264 Preview resolution 4CIF real time (PAL: 704*576, NTSC: 704*480) Playback resolution 4CIF/DCIF/2CIF/CIF/QCIF real time Video input 8/16 channels BNC (1.0Vp-p, 75Ω)
  • Page 114 User Manual of DS-8000-S Series Net DVR 1024×768/60Hz External alarm in Relay output 100~240VAC, 6.3A, 50~60Hz Power supply Power consumption 20－42W (without HDD and CD-R/W) Working temperature -10℃--＋55℃ Working humidity 10％--90％ Size 19” Standard (450mm*450mm*95mm) ≤8Kg (without HDD and CD-R/W) Weight PAL: 176*144(QCIF), 352*288(CIF), 704*288(2CIF), 528*384(DCIF), 704*576(4CIF);...

  • Page 115: Appendix D Quick Search Function Table

    User Manual of DS-8000-S Series Net DVR Appendix D Quick Search Function Table Type Name Description Index User Create and delete users. System has one default management administrator. The administrator can create 15 users Safety and define their rights. function Password Modify password.
  • Page 116 User Manual of DS-8000-S Series Net DVR Remote Remote record real time stream. record Remote Remote playback the recorded files in DVR playback Download Download recorded files in DVR. Remote Remote upgrade firmware. upgrade Transparent Remote control serial device connected with serial 5.16...

  • Page 117: Appendix E Troubleshooting

    User Manual of DS-8000-S Series Net DVR Appendix E Troubleshooting Failure Possible reasons After plugging in power, turning on the power switch, Power cable is broken. “POWER” light in front Panel does not turn on, and fan Power supply is broken.
  • Page 118 User Manual of DS-8000-S Series Net DVR password, ect). Old player SDK (playm4.dll) Notes: Place the DVR in well ventilated space so that it operates within the allowed range of temperature and humidity as in specification. If the circuit board is wet, dust on circuit board can cause a short circuit. The circuit board, plug and socket, housing fan and housing should be cleaned by brushing regularly.

  • Page 119: Appendix F Product Service

    User Manual of DS-8000-S Series Net DVR Appendix F Product Service Thank you for choosing our products. All of our products users can enjoy a conditional free repair guarantee service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for the damage caused by non personal acts).

  • Page 120: Appendix G Customer Information Card

    User Manual of DS-8000-S Series Net DVR Appendix G Customer Information Card User’s Name r./Mrs. Company Name Post Address Postcode Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor Page Total...

  • Page 121: Total

    User Manual of DS-8000-S Series Net DVR Suggestions: Page Total...

This manual is also suitable for:

Ds-8000hci-s seriesDs-8000hfi-s seriesDs-8004hfi-sDs-8004hci-sDs-8016hci-sDs-8016hfi-s

Table of Contents