User Manual of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
8.1 Setting Motion Detection Alarm
Steps:
1.
Enter Motion Detection interface of Camera Management and choose a camera you want to set up motion
detection.
Menu> Camera> Motion
2.
Set up detection area and sensitivity.
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag the sensitivity bar to set
sensitivity.
Click Handling button and set alarm response actions.
3.
Click Trigger Channel tab and select one or more channels which will start to record/capture or become
full-screen monitoring when motion alarm is triggered.
Figure 8.1Motion Detection Setup Interface
Figure 8.2 Set Detection Area and Sensitivity
128