HIKVISION DS-8004HCI-S User Manual page 99

may be less than 30 Seconds.
•
PostRecord Time: This sets the length of time the DVR will continue to record in alarm
record mode after the alarm clears. When external alarm or motion alarm ends the DVR
will continue recording for a selected period of time. The options are: 5 Seconds (default),
10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes and 10 Minutes.
•
Enable Event Para: This setting activates Event recording parameters. "×" means
disable and "" means enable.
•
Enable Rec: This setting determines whether the camera will record. Recording may be
halted based on additional schedule settings.
•
Schedule: When you enable recording function, you can setup recording schedule.
Note: When the camera's recording schedule is modified, you must reboot the DVR before the
changes will take effect.
All day Recording Setup:
1. Enable "Enable Rec" and enter the recording "Schedule" menu.
2. In the recording menu, use [ENTER] or [EDIT] to enable the record function ("" flag).
Select the "Schedule" button to enter the recording schedule menu.
3. Select a day and enable all day recording: Day selection options: Monday, Tuesday,
Wednesday, Thursday, Friday, Saturday and Sunday. Use the [↑] [↓] key to select a day.
99