Manual Record - HIKVISION DS-8004HCI-S User Manual

4.5 Manual Record

Note: In order to perform this function the DVR must have drives installed and formatted and the
user login password must have "Record" enabled. Manual record will lose effective after reboot.
Manual record:
1. In the live view mode, press the [REC] key. In the pop-up login dialog, select a user name
and input the correct password to enter the "Manual Record" interface.
2. In menu mode, press [REC] to enter the "Manual Record" interface directly.
Manual Record Menu:
The Manual Record interface has the following selections: Channel number, channel status,
start/stop record, start all and stop all buttons.
1. Channel: Indicates available camera inputs.
2. Status: Indicates one of four settings:
recording (or set to record including: Continuous recording, alarm recording, motion
detection recording). Red means network transmission. Orange means both recording and
network transmission.
3. Start/Stop: "" means start recording corresponding channel. "×" means stop recording.
means idle. Green means the channel is
53