HIKVISION DS-8004HCI-S User Manual page 52

PTZ Control Options:
Direction control keys: [↑], [↓], [←], [→]
ZOOM control keys:
FOCUS control keys:
IRIS control keys:
Adjust preset keys: [REC/SHOT];
Auto control key:
Wiper control key: [WIPER/MENU]
Light control key:
Auxiliary control key:
Calling Preset positions:
In the PTZ control mode, press the [REC/SHOT] key, and then enter the preset number (three
numeric keys). The camera will go to the corresponding preset position.
Setting Preset Positions:
To set a camera preset position, move the camera to the desired position. Press and hold the
[REC/SHOT] key while entering the preset number.
Note: A preset must be established before you will be able to call the preset in normal operation.
Refer to PTZ menu for preset setup.
When you exit PTZ control mode, the camera will stay at the current position (depending on the
dome used. Some domes may select a return to home position after a predetermined time).
Start/Stop auto PTZ control mode:
In PTZ control mode, press the [PLAY/AUTO] key to start the PTZ auto function. Press the
[PLAY/AUTO] key again to stop.
Note: When PTZ is in auto mode it will stay in auto mode when you exit the PTZ mode. You must
enter PTZ control mode again, and press the [PLAY/AUTO] key to stop.
Exit PTZ control mode:
Press [ESC] or [ENTER] to exit and return to the live view mode.
[ZOOM+], [ZOOM-]
[FOCUS+], [FOCUS-]
[IRIS+], [IRIS-]
[PLAY/AUTO]
[LIGHT/F1]
[AUX/F2]
52