User Manual of DS-9500 Series NVR
Step7: Select one day in a week, and select All Day recording
if necessary. You may also set period recording by disable All
Day Recording; there are 8 time periods in one day. Then you
can select Alarm Recording from the drop-down menu beside
the periods. Then you may also select copy the settings to
whole week or to one day.
Note:
(1) Please make sure that each time period is not overlapped.
(2)The valid time of alarm recording is the intersection of arm
schedule and recoding schedule.
9.3.5 Other Recording Modes
Other Recording Modes are including "Motion detection & Alarm", "Motion detection | Alarm".
"&" means recording is triggered when two situations happened together.
"|" means recording is triggered when one of the situations happened.
The configurations are the same with "Motion detection recording" or "Alarm recording".
9.4 Alarm Settings
You can configure motion detection alarm, signal level alarm, video loss alarm and other alarm and linkage
through web client.
9.4.1 Motion Detection Alarm
Step1: The same with the Step 1 of Section 9.3.3 Motion Detection Recording.
Step2: The same with the Step 2 of Section 9.3.3 Motion Detection Recording.
Step3: The same with the Step 3 of Section 9.3.3 Motion Detection Recording.
Step4: The same with the Step 4 of Section 9.3.3 Motion Detection Recording.
Step5: Set the alarm linkage for motion detection and select
alarm output channel.
46