HIKVISION DS-8004HCI-S User Manual page 118

Setup PPP parameter
PPP Options:
•
PPP Mode: There are two options: "Active" and "Passive". "Active" means the DVR
will dialup through PSTN. The "Active" function is not available yet. "Passive" means
DVR will wait for dialup.
•
Callback mode: Only used in "PPP" mode. There are two options: "By Dialer" and
"Preset Tel'. This function is not currently available.
•
Remote IP: Only used in "PPP" mode. This IP is defined for the remote PC that will
connect to the DVR through PSTN.
•
Local IP: Only used in "PPP" mode. This IP is defined for the DVR.
•
Mask: Only used in "PPP" mode. Remote IP and Local IP are in the same sub net.
118