Setting The Reset Time - Oce 9800 User Manual

To select the current time:
Press the 'Time and Date' function button.
5
You can now adjust the hour displayed. Press the 'Time and Date' function
6
button again to adjust the minutes displayed.
When finished, exit key operator mode.
7

Setting the reset time

If the printer remains inactive for a given period of time (no buttons pressed),
or if the 'Correction' button is pressed, and reset time is enabled, the default
printer settings will return to their default values. This period of time is called
the reset time.
The factory default for reset time is 2 minutes, but this value can be changed
to any time between 1 and 99 minutes, or it can be de-activated entirely.
Setting the reset time
Access key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Enable 'Reset time' by pressing the function button (see figure 56).
3
Prints: Ready to print
0
Timers
On
08 00.
Zoom
Off after
General
4 hrs.
......................................................................................................................................
Controller
On/Off-timer
[56] Reset time
Use the numeric or higher/lower buttons to set the required reset time.
4
Or,
Press the function button to de-activate the function, thus forcing users to
5
manually reset the system.
When ready, exit key operator mode.
6
Key operator
................
................
Program
Machine
From:
Monday
Up to:
Friday 2 min
Reset
Work days
time
................ ................
Finishing Copy
Time:
12 00.
Date:
01 01. 95.
Time and
Date
65