Table of Contents
Advertisement
Fig. 4
4.
Connect the user device(s) to the port labeled USER on the rear of the NTI Switch using one of the methods detailed below.
•
PS/2- Attach the 8-pin miniDIN male end of a VKTINT-1 to the Universal KVM switch at the USER port. The keyboard will plug into the
purple female connector with the keyboard symbol on it (see Fig. 5), and the mouse will plug into the green female connector with the mouse
symbol on it (see Fig. 6).
Fig. 7
•
MAC- Attach the 8-pin miniDIN male end of a MKTINT-1 to the NTI switch at the USER port. Attach the keyboard/mouse assembly to the 4-
pin miniDIN female end of the MKTINT-1.
Fig. 8
4
Mouse Symbol
Keyboard Symbol
Fig. 6
Fig. 5
Advertisement
Table of Contents
