NTI PRIMUX MATRIX KVM SWITCH VIA CAT 5
Telnet>set term vt100 (to configure Telnet for proper terminal emulation)
C:\>Microsoft
Press <Enter>
The screen will return:
Will term type
Preferred term type is vt100
Microsoft Telnet>
C:\>Microsoft Telnet>
Press <Enter>
The screen will return:
Line feed mode - Causes return key to send CR
Microsoft Telnet>
C:\>Microsoft
Telnet>open 192.168.1.22 23
Press <Enter> and continue below under "Login to the Main Menu".
Log In to the Main Menu
A login screen will present itself prompting for a username and password.
<root >
Enter the username -
<nti>
Enter the password-
Only user "root" and other users with administrator rights can access this menu.
Passwords are case sensitive. The administrator username cannot be changed from "root", but the password should be changed
(see page 48).
(to configure Telnet to handle the <Enter> key properly within the menu)
unset crlf
Figure 45- Telnet-login menu
(or substitute current IP address)
44