Pinout For Matrix Y-1 Cable; Rack Mounting Instructions; Figure 22- Pinout For Matrix Y-1 Cable; Figure 23- Mount The Veemux-A To A Rack - Network Technologies VEEMUX SM-8X4-HDA Installation And Operation Manual

NTI AUDIO/HD VIDEO MATRIX SWITCH

Pinout for Matrix Y-1 Cable

Wiring Schematic of Matrix-Y-1 cable
9D Male
(Unit #1)
Arrows indicate signal direction.

RACK MOUNTING INSTRUCTIONS

This NTI switch was designed to be directly mounted to a rack. It includes a mounting flange to make attachment easy.
Install 4 cage nuts (supplied) to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch.
Then secure the NTI switch to the rack using four #10-32 screws (supplied).
Do not block power supply vents in the NTI switch chassis (if provided) .
behind the NTI switch.
Attach all cables securely to the switch and where necessary supply adequate means of strain relief for cables.

Figure 23- Mount the VEEMUX-A to a rack

9D Female
(Source)
2
3 3
5 5
2
7
Jumper
8
1
4 Jumpers
6

Figure 22- Pinout for Matrix Y-1 Cable

10-32
Rack Screws
(supplied)
9D Male
(Unit #2)
3
Not connected to
source connector
5
2
Be sure to tighten all mounting screws securely.
Be sure to enable adequate airflow in front of and
Rack
Cage Nuts
(supplied)
40