The Config File - Axis 570 User Manual

Appendix B: The Parameter List

The Config File

--- CONFIG MENU
NODE_ADDR. : 00 40 8C 10 00 86
ROOT_PWD. : pass
USERS. :
S_ROUTE. : AUTO (OFF, SINGLE, ALL, AUTO)
BASE_URL : www.axis.com
--- SNA MENU
SNA_ENB : YES
DEVICE_EMUL : 3174 (3174, 5494)
SNA_FR_TYPE : FR_802_2
NODE_ID : E0 7x xx xx
NODE_SAP : 4
NWORK_NAME : APPN
MODE_NAME : QRMTWSC
LU_NAME : Axxxxxxx
CP_NAME : Axxxxxxx
H1_ADDR : FF FF FF FF FF FF
H1_SAP : $4
H1_NW_NAME : APPN
H1_MOD_NAME : QRMTWSC
H1_LU_NAME : DEFAULT
AUTODIAL. : NO
DIALTIME. : 20
JOB_TIME. : 3
IR_TIME. : 10
N_PRT_DEV. : 1 (1-8)
SNA_HEXDUMP : NONE (NONE, R1, PR2, PR3, PR4, PR5, PR6,
138
The remainder of this appendix contains the complete
AXIS 570/670 MIO parameter list. The left column shows the
parameters and their default values as they appear in the config file,
and the right column contains brief descriptions of the parameters.
Parameters that can be changed via the printer's Front Panel are
marked with an * in the right-hand column. When setting up
parameters by printing a configuration file from an IBM system, most
parameters require the use of the
marked with a vertical double bar in the margin.
(FR_AUTO, FR_802_2, FR_DIX)
PR7, PR8)
%CONFIG++
Node Address
Root Password
User Authority and Printer Access
Token Ring Source Routing Mode (Only AXIS 670 MIO)
Default Base URL address
SNA Protocol Enabled
Control Unit Device Emulation
SNA Ethernet Frame Type
Node Identifier (IDBLK/IDNUM value) Only 3270 CU mode *
Node Service Access Point
Node Network Name Only 5250 CU mode
Node Mode Name Only 5250 CU mode
Node LU Name (5250 CU mode only),
where xxxxxxx = server serial number in reverse order
Node Control Point Name (5250 CU mode only),
where xxxxxxx = server serial number in reverse order
Host MAC Address
Host Service Access Point
Host Network Name Only 5250 CU mode
Host Mode Name Only 5250 CU mode
Host LU Name Only 5250 CU mode
Automatic Link Establishment
Link Establishment Retry Time
Job Separation Time-out
Intervention Required Time-out
Maximum Number of 5494 Printer Device Descriptions
SNA Hexdump Destination
AXIS 570/670 MIO User's Manual
command. These are
*
*
*
*
*
*
*
*