Axis 570 User Manual page 36

Using DHCP
in Windows
AXIS 570/670 MIO User's Manual
Follow these step-by-step procedure below to use the DHCP method:
1. Edit or create a scope in the DHCP manager of the DHCP
daemon. The entries included into this scope should include the
following:
• range of IP addresses
• subnet mask
• lease duration
• default router IP address
2. Activate the scope.
3. Enable the DHCP_ENB parameter in the Configuration file of the
AXIS 570/670 MIO using AXIS NetPilot™ or any other
preferred method.
Section 2: Basic Installation
35