Axis 570 User Manual page 113

UNIX
Section 8: Setting Up - UNIX
112
There are several different filters to choose from within the PR1_CSET
Character Set Conversion. Refer to Appendix B - The Parameter List, on
page 133. The output from the conversion filter is always IBM PC Set
2 (Code Page 437), and this is the character set the printer must be set
up for.
Example:
The Problem: Your network contains three hosts using the
character sets IBM PC Set 2, ISO 8859-2, and DEC.
The Solution: Assign each host to a separate logical printer, and
install character set conversion filters.
Edit the following entries in your config file:
PR1_CSET.
PR2_CSET.
PR3_CSET.
The Result:
Logical printer PR1 prints data transparently without conversion.
Logical printer PR2 converts ISO 8859-2 data to IBM PC Set 2.
Logical printer PR3 converts DEC data to IBM PC Set 2.
This arrangement will produce correct printouts for all language
specific characters.
: NONE
: ISO>IBM
: DEC>IBM
AXIS 570/670 MIO User's Manual