Axis 570 User Manual page 70

AXIS 570/670 MIO User's Manual
When all parameters have been set the
settings permanently. The
printing. In order to maintain backward compatibility, some
parameters must be preceded by a
Appendix B - The Parameter List, on page 133.
Example:
To set the parameters to their default values, enter the following
in your document and print it.
%CONFIG+ password
PRDRIVER = PCL5;
%CONFIG++
NODE_SAP = 4;
H1_SAP = 4;
AUTODIAL = NO;
%CONFIG--
PREMUL = 3816_CX;
SYSL = 37;
BIN1 = LETTER, COR;
SAVE;
%CONFIG-
Section 3: Setting Up - SNA
SAVE
command resumes normal
%CONFIG-
%CONFIG++
(If you have not changed the default password (pass), the password is optional.)
SNA
command saves the
command. See also
69