The Parameter List; The Config File - Axis C1440AXIS - 1440 Print Server User Manual

Appendix B The Parameter List

The Config File

Note:
--- GENERAL MENU
NODE_ADDR. : 00 40 8C 10 00 86
BASE URL. : WWW.AXIS.COM
ROOT_PWD. : pass
HP_JETADMIN. : AUTO_SENSE (AUTO_SENSE, YES, NO)
--- TCP/IP MENU
TCP_ENB. : YES
INT_ADDR. : 0 0 0 0
DEF_ROUT. : 0 0 0 0
NET_MASK. : 0 0 0 0
LPD_BANN. : OFF
DHCP_ENB. : YES
BOOTP_ENB. : YES
RARP_ENB. : YES
WINS_ENB. : YES
WINS_ADDR1. : 0 0 0 0
WINS_ADDR2. : 0 0 0 0
NBT_SCOPE_ID. :
AXIS 1440 User's Manual
This appendix provides an overview of the AXIS 1440 parameters.
The left-hand column of this table shows the parameters and their
default values as they appear in the config file, and the right-hand
column contains a brief description of each parameter.
After you change them, most parameters take effect for the next print
job. If Requires Restart appears in the parameter description, you must
restart the AXIS 1440 before a change to that parameter takes effect.
The Root Password parameter (ROOT_PWD) only appears when
you're logged in to the AXIS 1440 using root. It does not print when
you press the test button.
Appendix B: The Parameter List
Node Address
Default Base URL Address
Root Password
HP JetAdmin Support Enabled
TCP/IP Protocol Enabled
Internet Address
Default Router Address (0.0.0.0 for no router)
Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
LPD Banner Page Disabled
DHCP Protocol Enabled
BOOTP Protocol Enabled
RARP Protocol Enabled
WINS Protocol Enabled
Internet Address of the primary WINS server
Internet Address of the secondaryWINS server
Defines the NetBIOS scope to be used with WINS Name Registration
81