Axis 570 User Manual page 95

OS/2
Section 6: Setting Up - OS/2
About AXIS Print
Utility for OS/2
Note:
Install the AXIS
570/670 MIO
Note:
94
AXIS Print Utility for OS/2 is a dual purpose application for network
printing in the OS/2 environment. Its fundamental purpose is to:
1. Install and maintain the AXIS 570/670 MIO printer port as an
OS/2 printer port.
2. Capture and monitor print jobs directed to the
AXIS 570/670 MIO port. Print jobs may be directed through a
spool directory either at your local hard disk, or at the file server.
The printer port status of your AXIS 570/670 MIO may be
monitored and pop-up notification messages can be generated,
keeping you informed of completed print jobs or any problematic
condition.
The NetBEUI protocol must be active. If not, use MPTS/LAPS
(LAN Server) or SETUP (LAN Manager) to activate it.
1. When AXIS Print Utility for OS/2 is running, click Install to
install your AXIS 570/670 MIO. It will then appear in the list as
<name>.MIO, where <name> is AX followed by last six digits of
your print server number. e.g. AX100086.MIO. However, this
alphanumeric name will be superseded by any new name given to
your AXIS 570/670 MIO when using AXIS NetPilot™.
2. Select the port that you wish to install, then click Install.
Repeat this procedure for each server using the AXIS 570/670 MIO.
The AXIS Print Utility for OS/2 must be running in order to
print using your AXIS 570/670 MIO.
AXIS 570/670 MIO User's Manual