Axis 570 User Manual page 32

Using ARP in UNIX
AXIS 570/670 MIO User's Manual
You may also use the ARP method for downloading the Internet
address within a UNIX environment:
AXIS 570 MIO Ethernet:
Type the following command:
arp -s <host name> <Ethernet address> temp
ping <host names>
Example:
arp -s npsname 00:40:8c:10:00:86 temp
ping npsname
The host will return
This indicates that the address has been set and the communication is
established.
AXIS 670 MIO Token Ring:
Type the following command:
arp -s 802.5 <host name> <node address> temp
ping <host names>
Where the node address is either the serial number found on the
underside label of the AXIS 670 MIO or a Locally Administrated
Address.
Example:
arp -s 802.5 npsname 00:02:31:48:00:61 temp
ping npsname
The host will return
This indicates that the address has been set and the communication is
established.
Section 2: Basic Installation
npsname is alive,
npsname is alive,
or some similar message.
or some similar message.
31