Axis 570 User Manual page 136

Note:
Editing Using the
Printer Front Panel
AXIS 570/670 MIO User's Manual
Example:
Select the PCL5 printer driver and disable the NetWare protocol:
%CONFIG+ password;
PRBANK = PCL5;
%CONFIG++
NETW_ENB = NO;
%CONFIG--
SAVE;
%CONFIG-
For parameters requiring more than one value, the values should
be separated using a comma.
A number of parameters controlling basic communication and printer
emulation in the SNA environment can be set up using the printer
front panel. This is particularly useful in networks where no Windows
computers are available to run the AXIS NetPilot™ utility. The
parameters that can be set up are:
• SYSL – System Language
• PREMUL – Printer Emulation
• DEVICE_EMUL – Control Unit Device Emulation
• NODE_ID – Node Identifier
• NODE_SAP – Node Service Access Point
• H1_ADDR – Host (destination) MAC Address
• H1_SAP – Host Service Access Point
• H1_NW_NAME – Host Network Name
• H1_LU_NAME – Host LU Name
• AUTO_DIAL – Automatic Link Establishment
• NODE_ADDR – Node Address (AXIS 670 MIO)
• INT_ADDR – IP Address
Appendix B: The Parameter List
(If you have not changed the default password (pass), the
password is optional)
135