Axis 570 User Manual page 47

SNA
Section 3: Setting Up - SNA
N_PRT_DEV The setting of the N_PRT_DEV parameter defines the maximum
number of printer device descriptions that will be created. The default
is 1 for AXIS 570/670 MIO. A range of 1-8 is allowed. If the
N_PRT_DEV parameter is set to 3, device descriptions for local
location addresses 01-03 are relevant. If the setting is 1, only local
location address 01 will be available.
Configuration and
The configuration created in the AS/400 and the mapping to the AXIS
Mapping 570/670 MIO as a result of the autoconfiguration process is illustrated
by the figure below.
Configuration created in the AS/400 and the mapping to the AXIS 570/670 MIO
as a result of the autoconfiguration
46 AXIS 570/670 MIO User's Manual